Denso BHT-6000 - page 42

Chapter 2. Getting Started the BHT-6000 and System Mode

2.4.3 Adjusting the LCD Contrast & Beeper Volume,

and Displaying the Battery Voltage Level

[ 1 ] Adjusting the LCD Contrast & Beeper Volume

While holding down the M1 key, press the PW key, and the following screen will

appear on the LCD. This screen will disappear if no keys are pressed for five seconds.

(The current selection is reverse-displayed.)

LCD CONTRAST

BEEPER VOLUME

Adjusting the LCD contrast

You can adjust the LCD brightness to eight contrast levels.

1) Use the F5 and F6 keys to select the LCD CONTRAST line.

2) To decrease the contrast, press the F7 key; to increase it, press the F8 key.

Adjusting the beeper volume

You can adjust the beeper volume to four levels from OFF to MAX.

1) Use the F5 and F6 keys to select the BEEPER VOLUME line.

2) To turn down the volume, press the F7 key; to turn it up, press the F8 key.

After making the above setting, either press the ENT key or press no key for five

seconds, and the new setting will be fixed and the above screen will disappear.