29
Chapter 2. Getting Started the BHT-6000 and System Mode
2.5 Operating in System Mode
System Mode is an operating software exclusively designed for the effective use of the
BHT-6000, which includes various functions as shown on the following pages.
2.5.1 Starting System Mode
To start up System Mode, power on the BHT-6000 while holding down the SF and 1
keys. This operation calls up the SYSTEM MENU on the LCD as shown below.
SYSTEM MENU
1:EXEC PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST 6:VER
The function selected is reverse-displayed (white-on-black) with the cursor. To select a
desired item in System Mode, press the corresponding numerical key and then press
the ENT key.
The keys below are so designed that the function of each key is consistent in every
screen.
Numerical keys Pressing a numerical key corresponding with a desired
menu number selects the desired item displayed on the
screen.
ENT key Pressing this key registers the selected item and executes
the corresponding function.
Pressing F5 and F6 moves the cursor up and down,
respectively, to select a desired item.
Pressing F7 and F8 moves the cursor to the left and
right, respectively, to select a desired setting.
The C key is inoperative on the SYSTEM MENU. On other screens, pressing the C
key returns to the immediately preceding screen.
The power-on default is "EXEC PROGRAM" which is reverse-displayed. Once any
other item is selected, the selected item will be reversed with the cursor when you turn
back to the SYSTEM MENU.
F5 and F6 keys
F7 and F8 keys