How to Set a Program
➀Setting a START TIME
Press the Program SET button. The Program SET button and START TIME LEDs will illuminate. Press the HRS and MIN buttons to set the START TIME
➁Setting an END TIME
Press the Program S ET button until the E ND TIME LED illuminates. Press the HRS and MIN buttons to set the E ND TIME
➂Setting the CLOCK TIME
Press the Program S ET button until the SET CLOCK LED illuminates. Press the HRS and MIN buttons to set the current clock time into the unit.
NOTE: The AM/PM LED will change with the HRS button.
➃Programming the Temperature SET POINT
Press the Program S ET button until the current SET POINT temperature display begins to fl ash on and off. Select a new desired SET POINT temperature by pressing the SET TEMP buttons (▼/▲).
➄Programming the Fan Speed
Press the Program S ET button until one of the Fan Speed button LEDs (High/Low) begin to fl ash. This is the current programmed Fan Speed. To change the pro- grammed Fan Speed, simply press the other Fan Speed button.
➅Exiting the Program SET Function
After changing any of the above settings, continue pressing the Program SET button until the Program SET button LED turns off. The unit will then return to the previous mode.
➆Activating/Deactivating a Preset Program
Press the Program RUN button to activate/deactivate a preset program. The Program RUN LED will illuminate when activated.
NOTE:
•The unit will return to the previous mode if a program is turned off while it is running.
•The Program RUN LED flashes while a program is running. It is illuminated con- tinuously when the program mode is activated.
•While a program is running, the program can only be stopped by pressing the Program RUN button. All other buttons are inoperable when a program is run- ning.
•The unit returns to the previous mode at the end of a program.
•The unit does not have to be running to set a program.
•During programming, the unit returns to the previous mode if no activity occurs within approximately 35 seconds.
6
