Operating Chain SAW, Extension Cords, Oiling Chain

ELECTRIC CHAIN SAW

OPERATING CHAIN SAW

WARNING: Read and under- stand this owner’s manual be- fore operating this saw. Make certain you read and understand all Safety Warnings, pages 2 and

3.Improper use of this chain saw can cause severe injury or death from ﬁre, electrical shock, or body contact with moving chain, or falling wood.

EXTENSION CORDS

Use proper extension cords with this saw. Use only extension cords marked for out- door use. The cord must be marked with sufﬁx W or W-A following the cord type designation. Example: SJTW-A or SJTW.

Use proper sized cord with this saw. Cord must be heavy enough to carry current needed. An undersized cord will cause volt- age drop at saw. Saw will lose power and overheat. Follow cord size requirements listed below.

Cord Length	AWG Cord Size
25 feet	16 AWG

50 feet	16 AWG

100 feet	16 AWG

150 feet	14 AWG

Models LNT-2: 076728K, 100089-06, &

099178H; Pole Saw Assy 104317, Pole

Saw 104316-04

Cord Length	AWG Cord Size

25 feet	16 AWG

50 feet	16 AWG

100 feet	14 AWG

150 feet	12 AWG

Models EL-7: 075762J, 098013J, 099039J, 100015, 100089-01, 100089-04, 100089-05,

&100089-07; EL-7 Fast Sharp 076702J; EL-1, EL-1 Fast Sharp

Keep cord away from cutting area. Make sure cord does not catch on branches or logs during cutting. Inspect cords often. Replace damaged cords.

The extension cord may come undone from the power cord during use. To avoid this, make a knot with the two cords as shown in Figure 8 below.

Extension	Chain Saw
Cord	Power Cord

Figure 8 - Tying Extension Cord and Power Cord in Knot

OILING CHAIN

Always check oil level before using saw. To oil chain, press oil cap. Do not attempt to operate the oiler while cutting with the saw. Oil will feed onto guide bar and chain. Press oil cap at least once before each cut. Check oil level often by looking at oil sight level hole. Oil sight level hole is on left side of saw, between front handle and front hand guard.

Figure 9 - Pressing Oil Cap to Oil Chain

CUTTING WITH THE CHAIN SAW

1.Connect saw to extension cord. Con- nect extension cord to power supply.

2.Make sure section of log to be cut is not laying on ground. This will keep chain from touching ground as it cuts through log. Touching ground with moving chain will dull chain.

3.Use both hands to grip saw. Always use left hand to grip front handle and right hand to grip rear handle. Use ﬁrm grip. Thumbs and ﬁngers must wrap around saw handles (see Figure 10).

4.Make sure your footing is ﬁrm. Keep feet apart. Divide your weight evenly on both feet.

5.When ready to make a cut, press in switch lockout with right thumb and squeeze trigger (see Figure 10). This will turn saw on. Releasing trigger will turn saw off. Make sure saw is running at full speed before starting a cut.

6.When starting a cut, place moving chain against wood. Hold saw ﬁrmly in place to avoid possible bouncing or skating (sideways movement) of saw.

7.Guide saw using light pressure. Do not force saw. The motor will overload and can burn out. It will do the job better and safer at the rate for which it was intended.

8.Remove saw from a cut with saw run- ning at full speed. Stop saw by releas- ing trigger. Make sure chain has stopped before setting saw down.

9.Practice until you can maintain a steady, even cutting rate.

Switch

Lockout

Trigger

Figure 10 - Switch Lockout and Trigger Location

105419

100015, 075762J, 104316-04, 076702J, 076728K specifications

Desa 100089-01, 076728K, 100015, and 076702J, along with the model 104316-04, represent a significant advance in modern technology and design, showcasing innovative features suited for various applications. These models are part of a wider effort to integrate efficiency and performance in consumer products.

Starting with the Desa 100089-01, it stands out for its robust construction and user-friendly interface. This model is engineered with high-grade materials that enhance durability while ensuring a lightweight design, resulting in easy portability without compromising strength. The intuitive controls allow users to operate the device seamlessly, making it ideal for both novice and experienced users.

The 076728K model features advanced connectivity options, supporting both wired and wireless connections. This adaptability makes it versatile for integration into various environments, whether in the home or office. Moreover, it includes smart technology that allows users to monitor and control settings remotely through a dedicated app, thereby enhancing convenience and efficiency.

The 100015 model takes a unique approach to energy consumption. It is equipped with state-of-the-art energy-saving technology that minimizes power usage while maintaining high performance. This feature is particularly beneficial in reducing overall operational costs and promoting sustainability.

The 076702J incorporates cutting-edge safety features, ensuring that users can operate it without worries. With multiple fail-safes and automatic shut-off features, user safety is greatly prioritized. Additionally, this model is designed to operate quietly, making it an excellent choice for environments where noise reduction is essential.

Finally, the 104316-04 model excels in versatility. Its design caters to multiple functionalities, making it suitable for a range of tasks. The adaptability of this model allows users to switch between different modes quickly, enhancing productivity whether in a workspace or a recreational setting.

Overall, these models—Desa 100089-01, 076728K, 100015, 076702J, and 104316-04—showcase a commitment to quality and performance. With advanced features, innovative technologies, and a focus on user experience, they are well-equipped to meet the needs of today's consumers. Each model brings unique characteristics to the table, ensuring that there’s a suitable option for a diverse array of applications.

Desa 076702J Operating Chain SAW, Extension Cords, Oiling Chain, Cutting with the Chain SAW

Models: 100015 075762J 104316-04 076702J 076728K 100089-01