Desa 110946-01A owner manual Adjusting Pole Length, Using the Pole Trimmer, Operating Positions

®

ELECTRIC POLE TRIMMER

OPERATING POLE TRIMMER

Continued

Locking the Pole Trimmer ON

1.Push the trigger lock button forward to Position 2 and squeeze the trigger lever to the ON position. The Pole Trimmer will start running.

2.While the Pole Trimmer is running, push the trigger lock button forward again to Position 3. Hold the button there while releasing the trigger lever, then release the lock button. This locks the trigger lever in the ON position and the Pole Trimmer will continue running.

3.To turn the Pole Trimmer OFF, squeeze the trigger lever and release it. The trig- ger lock button will reset to Position 1, locking the trigger in the OFF position.

Note: If the Pole Trimmer is locked ON during use and the Pole Trimmer becomes disconnected from the power supply, Disen- gage the lock ON feature before reconnecting to the power supply.

Trigger Lock

Button Position 3

Figure 11 - LockingTrigger in ON Position with Trigger Lock Button in Position 3

ADJUSTING POLE LENGTH

The Remington® Pole Trimmer has a tele- scoping pole assembly that has an extendable range of 10 inches. A cam levered collet is used to hold the pole in position at any extended length.

1.To extend the pole, unlock the clamping lever as shown in Figure 12. Pole will slide freely.

2.Pull inner pole section out to desired length of extension.

3.To lock pole in position, tighten clamping lever as shown in Figure 12.

UNLOCKLOCK

Figure 12 - Extending Telescopic Pole

USING THE POLE TRIMMER

The Pole Trimmer is a dual-purpose tool. It is designed to trim and shape tall, hard-to-reach hedges and bushes with its extended reach and pivoting power head.You can also adjust the Pole Trimmer to trim and shape smaller hedges and shrubs near the ground without having to bend or stoop.

OPERATING POSITIONS

To use the Pole Trimmer for trimming tall, hard-to-reach hedges or shrubs, hold the Pole Trimmer at the positions shown in Figure 13. Pivot the power head to several different positions to shape or sculpt shrubs or hedges.

Figure 13 - Trimming Tall Hedges or Shrubs

To use the PoleTrimmer for trimming smaller hedges or shrubs, hold the Pole Trimmer at the positions shown in Figure 14.

Figure 14 - Trimming Smaller Hedges or Shrubs

For more information, visit www.desatech.com 6 110939