OWNER’S MANUAL

OPERATING

HEATER

Continued

LIGHTING

INSTRUCTIONS

1.STOP! Read the safety information on page 10, column 3.

2.Make sure equipment shutoff valve is fully open.

3.Turn control knob clockwise to the OFF position.

4.Wait five minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Follow “B” in the safety in- formation page 10, column 3. If you don’t smell gas, go to the next step.

5.Press in and turn control knob coun-

terclockwise to PILOT/IGN position. Press in control knob for five(5) seconds (see Figure 15).

Note: You may be running this heater for the first time after hooking up to gas supply. If so, you may need to press in control knob for 30 seconds. This will allow air to bleed from the gas system.

•If control knob does not pop up when released, contact a qualified service person or supplier for repairs.

6.Release downward pressure on con-

trol knob and turn clockwise to OFF position.

7.Press in control knob and turn back to PILOT/IGN. This will cause the piezo ignitor to spark and light the pilot gas. If needed, repeat steps 5 through 7 until pilot lights.

Note: If pilot does not stay lit, refer to Troubleshooting, pages 13 through 15. Also contact a qualified service person or gas supplier for repairs. Until repairs are made, light pilot with match. To light pilot with match, see Manual Lighting Procedure.

8 . Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

Note: If pilot goes out, repeat steps 3 through 7.

Figure 15 - Control Knob In The OFF Position

 

Ignitor Electrode

Thermocouple

Pilot Burner

 

Figure 16 - Pilot

TO SELECT

HEATING LEVEL

WARNING: When running heater, set control knob at LOW or HIGH locked positions. Never set control knob between locked positions. Poor combustion and higher levels of carbon monox- ide may result.

CAUTION: Do not try to adjust heating levels by using the equip- ment shutoff valve.

Slightlypressincontrolknobandturncoun-

terclockwisetotheLOWorHIGH positions (see Figure 17).

IMPORTANT: Release downward pres- sure while turning control knob. Control knob will lock at the desired position.

Control

Knob Burners

Figure 17 - Burner Patterns

TO TURN OFF GAS

TO APPLIANCE

Shutting Off Heater

1.Turn control knob clockwise to the OFF position.

2.Turn off all electric power to the ap- pliance if service is to be performed.

Shutting Off Burner Only (pilot stays lit)

Turn control knob clockwise to the PILOT/IGN position.

MANUAL LIGHTING

PROCEDURE

1.Follow steps 1 through 5 under Light- ing Instructions.

2.With control knob pressed in, strike match. Hold match to pilot until pi- lot lights.

3.Keep control knob pressed in for 30 seconds after lighting pilot. After 30 seconds, release control knob.

107292

11

Page 10 Page 12
Page 11
Image 11
Desa CGR2N Lighting Instructions, To Select Heating Level, To Turn OFF GAS To Appliance, Manual Lighting Procedure
Page 10 Page 12

CGR2N specifications

Desa CGR2N is an innovative village concept designed to embrace modern living while preserving a sense of community and sustainability. This development integrates advanced technologies and green practices to create a holistic living experience for its residents. The central philosophy of Desa CGR2N is to foster interconnectedness among residents while providing access to essential amenities and services.

One of the main features of Desa CGR2N is its focus on smart homes. Each residence is equipped with state-of-the-art smart technology that enhances both security and convenience. Home automation systems allow residents to control lighting, heating, and security features through their smartphones, contributing to energy efficiency and enhanced safety. Furthermore, the integration of IoT devices supports real-time data collection, enabling residents to monitor and manage their energy consumption.

In addition to smart homes, Desa CGR2N incorporates renewable energy solutions, such as solar panels and wind turbines. These technologies significantly reduce the carbon footprint of the village, aligning with global sustainability goals. The development also encourages the use of electric vehicles, providing charging stations and infrastructure to support a shift towards greener transportation.

Community spaces are a vital aspect of Desa CGR2N, designed to promote social interaction and collaboration among residents. Parks, sports facilities, and communal gardens are strategically placed throughout the village, fostering a strong sense of belonging. The village layout prioritizes walkability and accessibility, ensuring that essential services, such as schools, healthcare centers, and shopping areas, are within easy reach.

Furthermore, Desa CGR2N emphasizes local food production through urban farming initiatives. Residents can participate in community gardens, which not only provide fresh produce but also educate individuals about sustainable agriculture practices. This focus on self-sufficiency further strengthens the community's resilience against external disruptions.

Overall, Desa CGR2N represents a forward-thinking approach to modern living, combining technology, sustainability, and community engagement. By prioritizing smart home features, renewable energy, and communal spaces, this village creates an environment where residents can thrive both individually and collectively. As urbanization continues to rise, developments like Desa CGR2N may serve as a blueprint for future living spaces that harmonize innovation with a deep sense of community.
Top Page Image Contents