HFL300 SERIES BRICK LINER KIT
INSTALLATION INSTRUCTIONS
IMPORTANT: Read entire instruction sheet before installing brick liner.
This brick liner accessory is approved for use in Series 4 32"
The Brick Liner Kit contains the following:
•1 - Rear Firebrick Panel
•2 - Side Firebrick Panels
•2 - Retainer Brackets
•2 - #10 Screws
Tools required:
•Phillips Screwdriver
•5/16" Hex Socket Wrench or Nut Driver
If any of these parts are missing or damaged, contact dealer where you purchased this kit. If they cannot supply original replacement parts, either contact your nearest Parts Central or call DESA Heating Products at
IMPORTANT: Always handle firebrick panels with two hands.
WARNING: Turn off, unplug, and let fireplace cool before installing brick liner. Only a qualified service person should service and repair fireplace.
NOTICE: You must remove log base assembly before installing brick liner.
1.To remove screen, lift screen up off the screws in front of fireplace (see Figure 1).
Screws 
for Mounting Screen
Figure 1 - Removing Fireplace Screen
Save for future reference.
For more information, visit www.desatech.com
