Desa HFVMR18, HFVMR24 Air For Combustion And Ventilation, Installation, Vented Natural Gas Logs

Models: HFVMR18 HFVMR24

1 16
Download 16 pages 7.94 Kb
Page 4
Image 4
AIR FOR COMBUSTION AND VENTILATION

VENTED NATURAL GAS LOGS

AIR FOR COMBUSTION AND VENTILATION

FLUE OPENING WARNING: This appliance shall not be installed in a con- fined space or unusually tight construction unless provisions are provided for adequate com- bustion and ventilation air. Read the following instructions to in- sure proper fresh air for this and other fuel-burning appliances in your home.

Today’s homes are built more energy effi- cient than ever. New materials, increased insulation, and new construction methods help reduce heat loss in homes. Home owners weather strip and caulk around windows and doors to keep the cold air out and the warm air in. During heating months, home owners want their homes as airtight as possible.

While it is good to make your home energy efficient, your home needs to breathe. Fresh air must enter your home. All fuel-burning appliances need fresh air for proper com- bustion and ventilation.

Exhaust fans, fireplaces, clothes dryers, and fuel burning appliances draw air from the house to operate. You must provide ad- equate fresh air for these appliances. This will insure proper venting of vented fuel-

NOTICE: Installation, service, and repair of this appliance must be performed by a qualified installer, service agency, company or gas supplier experienced with this type of gas appliance. Only fac- tory authorized components listed in these instructions may be used in accordance with the manufacturer’s instructions and all codes and requirements of the authority having jurisdiction. Any modifications to this kit, or use of unauthorized components or ac- cessory items will void the manufacturer’s warranty, and may result in a hazardous condition.

FLUE OPENING

SPECIFICATIONS

Note: This vented appliance must be in- stalled only in a solid-fuel burning fireplace with a working flue and constructed of non- combustible material.

The charts in Figure 2 indicate technical information regarding the installation of your gas log set. Please make sure that all of the specifications shown are applicable be- fore installation is attempted.

The fireplace must include a working flue and venting system with the minimum open- ings shown in the Figure 2.

CHECK GAS TYPE

Use only natural gas. If your gas supply is not natural gas, you must install ON/OFF Safety Valve/Pilot Kit (see Accessories, page 13). Call dealer where you bought log set.

If the fireplace does not have a gas supply shut-off valve, one must be installed.

VENTING SPECIFICATIONS FOR INSTALLATION

The fireplace chimney flue and vent must be drafting properly. To check the vent for proper drafting: Light a tightly rolled news- paper on one end and place it at the inside front edge of the fireplace. Observe the smoke and be sure the vent is properly drawing it up the chimney. If the smoke spills out into the room, extinguish the flame and remove any obstruction until proper venting is achieved.

The chimney flue must remain open a mini- mum of 3" at all times during the operation of this log set.

burning appliances.

INSTALLATION

MODEL

DESCRIPTION

Btu Input

Btu Input

Minimum

Natural Gas

Propane Gas

Vent Opening

HFVMR18

18" Multi-Side

55,000

45,000

8" dia.

HFVMR24

24" Multi-Side

65,000

55,000

8" dia.

 

 

 

 

 

CHECK GAS TYPE CAUTION: Do not remove the metal data plates attached to the burnerpan.Thedataplatescontain important warranty information.

VENTING SPECIFICATIONS FOR INSTALLATION WARNING: Before installing in a solid fuel burning fireplace, the chimney flue and firebox must be cleaned of soot, creosote, ashes, and loose paint by a quali- fied chimney cleaner. Creosote will ignite if highly heated. A dirty chimney flue may create and dis- tribute soot within the house. In- spect chimney flue for damage.

 

MINIMUM FIREBOX SIZES

 

 

 

 

 

 

 

 

 

 

 

 

 

LOG

FRONT

BACK

 

 

 

 

SIZE

WIDTH*

WIDTH**

DEPTH

 

 

HEIGHT

 

 

 

 

 

 

 

18"

28"

28"

16"

 

 

18"

24"

29 3/4"

29 3/4"

16"

 

 

18"

*Add 6" if safety valve/pilot is used **At depth indicated

BURNER ORIFICE

LOG

NATURAL

PROPANE/LP

 

 

 

 

 

SIZE

IN.

NUM.

IN.

NUM.

18"

.111

34

.073

49

24"

.129

30

.086

44

 

 

 

 

 

Figure 2 - Technical Information Charts

FUEL INLET PRESSURE SPECIFICATIONS (W.C.)

 

Min.

Max.

 

NG

5.5"

10.5"

 

LP

11"

13"

 

 

 

 

 

4

901915

Page 4
Image 4
Desa HFVMR18 Air For Combustion And Ventilation, Installation, Vented Natural Gas Logs, Flue Opening Specifications