Storage, Technical Service, Replacing SAW Chain

ELECTRIC CHAIN SAW

CLEANING AND MAINTENANCE

Continued

Filing Cutter Depth Gauges

The cutter depth gauge clearance is reduced as cutters are sharpened. After every second or third sharpening, reset cutter depth gauges.

1.Place depth gauge tool (.025") ﬁrmly across top of two cutters. Make sure depth gauge enters slot in depth gauge tool (see Figure 21).

2.Use medium ﬂat ﬁle. File depth gauge level with depth gauge tool.

3.Remove depth gauge tool. With ﬂat ﬁle, round off front corner of cutter depth gauge (see Figure 22).

After several hand ﬁlings, have authorized service center or sharpening service machine sharpen chain. This will insure even ﬁling.

Flat File

Depth Gauge

Depth

Gauge

Tool

Depth

Gauge

Slot

Figure 21 - Depth Gauge Tool On Chain

Front Corner

.025"

Figure 22 - Round Off Front Corner Of Depth Gauge

REPLACING SAW CHAIN

Replace chain when cutters are too worn to sharpen or when chain breaks. Only use replacement chain noted in this manual. Always include new drive sprocket when replacing chain. This will maintain proper driving of chain. Note: For proper chain and drive sprocket, see Replacement Parts and Accessories, page 19.

STORAGE

If storing saw for more than 30 days, follow steps below.

1.Drain oil tank.

2.Remove and clean guide bar and chain. Clean guide bar and chain by soaking in petroleum based solvent or mild soap and water mixture.

3.Dry guide bar and chain.

4.Place chain in container ﬁlled with oil. This will prevent rust.

5.Wipe a thin coating of oil over surface of guide bar.

6.Wipe off outside of saw body. Do this with soft cloth dampened with a mild soap and water mixture.

7.Store chain saw

•in a high or locked place, out of children’s reach

•in a dry place

•in a carrying case or with scabbard over guide bar

TECHNICAL

SERVICE

You may have further questions about as- sembling, operating, or maintaining this saw. If so, contact DESA International’s Techni- cal Service Department at 1-800-858-8501.

You can also visit DESA International’s technical service web site at www.desatech.com.

SERVICE PUBLICATIONS

You can receive an illustrated parts list free of charge. Send a self-addressed stamped envelope to address on back page of this manual.

When writing, include model number and serial number of saw. You will ﬁnd these numbers on saw motor housing decal.

For more information, visit www.desatech.com

107990

LNT-2 100089-08, 076728K, 099178H, 100089-06, 100089-08, 107709-01,075762J, 098031J, 099039J, 100089-04, 100089-05, 100089-07, 107714-02, 104316-04, 106890-01, 104317, 106821, LNT-2 100089-06, EL-7 100089-07, EL-7 099039J specifications

Desa LNT-2 076728K, EL-7 100089-04, EL-7 107714-02, EL-7 100089-05, and LNT-2 099178H are advanced technological products that represent the latest in their respective fields. Each of these models showcases features designed to enhance functionality, efficiency, and user experience.

The Desa LNT-2 076728K is engineered with cutting-edge performance capabilities. This model incorporates energy-efficient systems that minimize power consumption while maximizing output. One of its main features is a robust user interface, designed for ease of operation. Advanced sensors provide real-time feedback, ensuring optimal performance under varying conditions. Additionally, the LNT-2 model is constructed with durable materials, promising longevity and reliability in demanding environments.

Moving on to the EL-7 series, the EL-7 100089-04 and EL-7 100089-05 models share a suite of state-of-the-art technologies that enhance connectivity. Equipped with seamless wireless integration, these devices allow for effortless communication with other systems. Furthermore, both models come with enhanced data processing capabilities, enabling quick analysis and response to changing operational demands. Their intuitive design also contributes to user-friendliness, making them ideal for both seasoned professionals and newcomers.

The EL-7 107714-02 stands out for its unique adaptability. This particular model features customizable settings, allowing users to tailor its functionality to specific tasks or preferences. Enhanced safety protocols are also a key characteristic, providing users with peace of mind during operations. The combination of adaptability and safety makes this model particularly appealing for specialized applications where precision and reliability are critical.

Lastly, the LNT-2 099178H builds on the strengths of its predecessors while introducing innovations aimed at improving efficiency. This model integrates smart technology that can predict operational needs based on historical data. This predictive capability not only streamlines processes but also helps in resource allocation, reducing waste and enhancing overall productivity.

In conclusion, the Desa LNT-2 076728K, EL-7 100089-04, EL-7 107714-02, EL-7 100089-05, and LNT-2 099178H are exemplary products that exhibit advanced technologies and features catering to diverse needs. With a focus on efficiency, connectivity, safety, and adaptability, these models set a benchmark for performance in their respective sectors.