3
116261 www.desatech.com
During Operation of Tool
1. Keep all parts of body away from staple/nail exit on tool.
2. Never point tool at anyone.
3. Keep children, animals, and bystanders away from tool and extension cord
at all times. Only tool user should be in work area.
4. Stay alert. Use common sense while operating tool.
5. Keep power switch in the OFF (0) position and finger off trigger until ready
to drive staple/nail.
6. Keep work area clean. Cluttered work areas invite injuries.
7. Secure work before using tool. Use both hands to operate tool.
8. Do not touch any metal part of tool when stapling/nailing into areas where
electrical wiring may be present. These areas include walls, floors, and
ceilings. If staple/nail contacts electrical wire, electric shock may occur.
9. Avoid body contact with grounded objects such as pipes, fences, and metal
posts.
10. Do not force tool. Use tool at rate for which it was designed.
11. Do not overreach. Keep proper footing and balance at all times.
12. Carry tool from one place to another
• with tool unplugged
• with power switch in the OFF (0) position
• with finger off the trigger
General
1. Inspect tool before and after each use. Check for any damage that may
affect operator safety or operation of tool. Check for broken or damaged
parts. Do not use tool if damage affects safety or operation.
2. Maintain tool with care.
• Never fire tool when empty of staples/nails. This may damage tool.
• Keep tool clean.
• Keep handles dry, clean, and free of oil and grease.
• Inspect power cord often.
• Never carry tool by power cord.
• Never yank power cord to unplug it.
• Keep power cord away from heat, oil, and sharp edges.
• Inspect extension cords often and replace if damaged.
• Never oil or grease any part of tool.
• Do not attempt to repair tool or replace broken parts.
3. Always store tool
• with staples/nails removed from magazine
• out of children’s reach
• in a high or locked place that is dry
Keep these operating instructions for reference. It is your guide to safe and
proper operation of this tool.