OWNER’S MANUAL
PRODUCT
IDENTIFICATION
Hot Air | Upper Shell | |
Outlet | Handle | |
(Front) | ||
|
UNPACKING
1.Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to inlet connector and hose/regulator assembly) for storage.
2. Remove all items from carton.
3. Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.
Fan Guard
Lower Shell
Power Cord
On/Off Switch
Generic LP 155 | |
| Inlet |
| Connector |
Hose /Regulator
Assembly
Figure 1 - Model RCLP155B
| Combustion Chamber | Nozzle |
THEORY OF | Clean | Fan |
Motor | ||
|
| |
OPERATION | Heated |
|
Air Out |
| |
| (Front) |
|
The Fuel System
The hose/regulator assembly attaches to the propane gas supply. The propane gas moves through the solenoid valve and out the nozzle.
The Air System
The motor turns the fan. The fan pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air.
Cool
Air In (Back)
Power
Cord
The Ignition System
The direct spark ignitor (DSI) sends voltage to the spark plug/ignitor. The spark plug/ ignitor ignites the fuel and air mixture.
THE SAFETY CONTROL SYSTEM
This system causes the heater to shut down if the flame goes out.
DSI | Solenoid | On/Off Switch |
| ||
|
|
Valve |
| Hose/Regulator |
Air For Combustion | Fuel | Assembly |
And Heating |
|
|
Figure 2 - Cross Section Operational View
103909 | 3 |
