OWNER’S MANUAL
PRODUCT IDENTIFICATION
Shell
Hot Air Outlet (Front)
Handle
Motor
Fan Guard
Heater Base
Piezo Ignitor | Power |
Button | Cord |
Automatic Control | Inlet |
Valve Button | Connector |
Hose /Regulator 
Assembly
Figure 1 - 35,000 BTU/Hr Model
UNPACKING
THEORY OF OPERATION
1.Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to inlet connector and hose/regulator assembly) for storage.
2.Remove all items from carton.
3.Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.
The Fuel System: The hose/regulator assembly attaches to the propane gas sup- ply. This provides fuel to the heater.
The Air System: The motor turns the fan. The fan pushes air into and around the combustion chamber. This air is heated and provides a stream of clean, hot air.
The Ignition System: The piezo ignitor lights the burner.
The Automatic Control System: This system causes the heater to shut down if the flame goes out.
103907 | 3 |
