Desa ROPANE CONSTRUCTION CONVECTION HEATER Product Identification, Propane Supply, Unpacking

Models: ROPANE CONSTRUCTION CONVECTION HEATER

1 24
Download 24 pages 16.95 Kb
Page 3
Image 3
PRODUCT IDENTIFICATION

PRODUCT IDENTIFICATION

Top

Shell

Thermocouple

Ignitor

Electrode

Burner Tube

Piezo Ignitor Button

OFF

 

LO

HI

MED

 

Valve Inlet

Control Knob

Base

 

 

 

Hose/Regulator

 

 

Assembly

 

 

Figure 1 - Product Identification

PRODUCT IDENTIFICATION

3

UNPACKING

THEORY OF OPERATION

 

PROPANE SUPPLY

 

VENTILATION

 

 

 

PROPANE SUPPLY

You must provide propane gas and propane tank(s).

Use this heater only with a propane vapor withdrawal supply system. See Chapter 5 of the Standard for Storage and Handling of Liquefied Petroleum Gas, ANSI/NFPA 58 and/or CAN/CGA B149.2. Your local library or fire department will have this booklet.

This heater will operate with a 20-pound (9,07 kg) propane tank. However, you can only operate it in the LOW position during mildly cool weather. At higher heat settings or during colder weather, you must use larger tanks.

The amount of propane gas ready for use from propane tanks varies. Two factors decide this amount.

1.The amount of propane gas in tank(s)

2.The temperature of tank(s)

The chart below shows the minimum number of 100-pound (45 kg) tanks needed to run the heater. Connect tanks together with a manifold.

Average Temperature (° F[° C])

Number

At Tank Location

Of Tanks

60° (15,6° )

1

40° (4,4° )

1

32° (0° )

1

20° (-6.7°)

1

10° (-12,2°)

2

0° (-17,8)

2

Less gas is vaporized at lower temperatures. Your local propane gas dealer will help you select the proper supply system.

UNPACKING

1.Remove all packing items applied to heater for shipment. Keep plastic cover caps (attached to valve inlet and hose/regulator assembly) for storage.

2.Remove all items from carton.

3.Check all items for shipping damage. If heater is damaged, promptly inform dealer where you bought heater.

THEORY OF OPERATION

The Fuel System: The hose/regulator assembly attaches to the propane gas supply. This provides fuel to the heater.

The Ignition System: The piezo ignitor lights main burner.

The Automatic Control System: This system causes the heater to shut down if the flame goes out.

VENTILATION

PROPANE SUPPLY WARNING: Provide at least a 2.5 square foot (76 cm) opening of fresh, outside air while running heater. If proper fresh, outside air ventilation is not provided, carbon monoxide poisoning can occur. Provide proper fresh, outside air ventilation before running heater.

UNPACKINGTHEORY OF OPERATIONFor more information, visit www.desatech.com

111695-01 C

Page 3
Image 3
Desa ROPANE CONSTRUCTION CONVECTION HEATER Product Identification, Propane Supply, Unpacking, Theory Of Operation