SAFETY INFORMATION

WARNING: This product con- tainsand/orgenerateschemicals known to the State of California to cause cancer or birth defects, or other reproductive harm.

WARNING: Not for home or recreational vehicle use.

WARNING: Fire, burn, inhala- tion, and explosion hazard. Keep solidcombustibles,suchasbuild- ingmaterials,paperorcardboard, a safe distance away from the heater as recommended by the instructions.Neverusetheheater inspaceswhichdoormaycontain volatileorairbornecombustibles, orproductssuchasgasoline,sol- vents,paintthinner,dustparticles or unknown chemicals.

ASPHYXIATION HAZARD

•Do not use this heater for heating human living quarters.

•Do not use in unventilated areas.

•The flow of combustion and ventilation air must not be obstructed.

•Proper ventilation air must be provided to support the combustion air require- ments of the heater being used.

•Refer to the specification section of the heater’s manual, heater data plate, or contact DESA Heating Products to determine combustion air ventilation requirements of the heater.

•Lack of proper ventilation air will lead to improper combustion.

•Improper combustion can lead to car- bon monoxide poisoning leading to serious injury or death. Symptom of carbon monoxide poisoning can include headaches dizziness and difficulty in breathing.

1.Keep children and animals away from heater.

2.Never operate heater while sleeping or unat- tended.

3.Check the heater thoroughly for damage. Do not operate a damaged heater.

4.Do not modify the heater or operate a heater which has been modified from its original condition.

5.Use only propane/LP gas.

6.Use only vapor withdrawal propane/LP supply. If there is any question about vapor withdrawal, ask your propane/LP dealer.

7.For outdoor use only. Area must be well ven- tilated. Provide minimum openings of 1 sq ft (.093m²) near the floor and 1 sq ft. (.093m²) near the ceiling. Do not use inside house, camper, tent, vehicle, or any type of unvented or enclosed area.

8.Do not use heater in basement or below ground level.

9.Before connecting heater to the propane/LP tank, make sure the heater regulator knob is in the "OFF" position. Always connect and light heater in areas free of open flames.

10.Mount the propane/LP cylinders vertically (shutoff valve up). Secure them from falling or being knocked over and protect them from damage.

11.IMPORTANT: Use only the hose and regulator assembly provided with the dual burner tank top heater. Inspect the hose assembly before each use. If there is excessive abrasion or wear, or hose is cut, replace with hose assembly listed on parts list before using heater. The hose and regulator must be protected from damage.

12.The heater burner must be at least 2 ft. (.61m) above the floor. Always attach to propane/LP tank in an upright position. Never operate a heater on its side or attach to propane/LP tank in a horizontal position. This could lead to dangerous flare-ups or fire. Do not direct heat toward propane/LP cylinders.

13.Maintain minimum clearance from nor- mal combustible materials (like paper) as follows: Sides - 3 ft. (.91m); Top and Front - 5 ft. (1.5m). Locate 10 ft. (3m) from canvas or plastic tarpaulins or similar cover- ings and secure them to prevent flapping or movement due to wind action.

14.If at any time gas odor is detected, IMME- DIATELY DISCONTINUE operation until the source of gas has been located and cor- rected.

113973-01A

www.desatech.com

3

Page 2 Page 4
Page 3
Image 3
Desa TT30 10, TT15A 10, SPC-15R owner manual Safety Information, Asphyxiation Hazard
Page 2 Page 4

SPC-15R, TT15A 10, TT30 10 specifications

Desa TT30 10, TT15A 10, and SPC-15R are innovative products in the realm of industrial tools and equipment, designed to optimize performance, efficiency, and user experience. Each model embodies cutting-edge technology and thoughtful engineering tailored to meet the demands of modern operations.

The Desa TT30 10 is a versatile tool engineered for heavy-duty performance. This model is equipped with a robust motor that delivers high torque, making it suitable for a variety of applications, from manufacturing to construction. Its user-friendly interface includes an ergonomic handle that minimizes fatigue during prolonged use. Additionally, the TT30 10 features an advanced cooling system, which prevents overheating and prolongs the lifespan of the equipment, ensuring it can handle extended work sessions without compromising performance.

On the other hand, the Desa TT15A 10 is recognized for its compact design and lightweight structure, making it an excellent option for those looking for portability without sacrificing strength. This model is particularly advantageous for smaller projects or tight workspaces. The TT15A 10 incorporates a unique vibration-damping technology, which drastically reduces vibrations during operation, leading to enhanced accuracy and comfort. This feature is especially beneficial for precision tasks, allowing users to work more effectively over longer periods.

Meanwhile, the SPC-15R stands out due to its advanced technological integration. This model is equipped with smart features such as real-time monitoring and diagnostics, allowing users to track performance metrics and receive alerts about maintenance needs. The SPC-15R also has a built-in energy-efficient motor that not only conserves power but also reduces operational costs, making it an eco-friendly choice for businesses. Its durable construction, combined with high-quality materials, ensures reliability and longevity, even in the most challenging environments.

Collectively, Desa TT30 10, TT15A 10, and SPC-15R represent a commitment to innovation and excellence in industrial tools. Each model incorporates features and technologies that cater to diverse operational requirements, emphasizing efficiency, durability, and user comfort. Whether for heavy-duty applications or precision tasks, these models provide solutions that meet the varying needs of industries today. As companies continue to seek out tools that enhance productivity while maintaining usability, these Desa models exemplify the future of industrial equipment.
Top Page Image Contents