Desa W32AOSA, W32AUA Assembling Perimeter Trim (Gas Fireplace Only)

Screws

Fixed	Holes are Behind Louver on
Louver	Fireplace Bottom for Attaching
	Fireplace to Wooden Mantel Base

Figure 9 - Screw Locations for Gas Fireplace with Fixed

Louver

Installing Fireplace without Flange

1.Place mantel assembly on wood base and center left to right having back of assembly flush with back of base.

2.Attach mantel to base using 6 brackets and 1/2" screws, 3 per leg assembly into threaded holes in base and leg assembly (see Figure 7, page 3).

3.Position fireplace inside mantel (see Figure 10). Care- fully position gas lines. Important: Use caution when positioning fireplace on base. Base may scratch easily.

4.Gas fireplace with louver door: Lower bottom louver door. Use two screws provided in fireplace hardware package and attach fireplace to wooden base (see Figure 8, page 3). Close louver door

Gas fireplace with fixed louver: Before installing logs or burner assembly (see owner’s manual) remove screws securing floor to assembly. Lift floor for access to bot- tom of fireplace. Use two screws provided in fireplace hardware package and attach fireplace base to wooden base (see Figure 9). Reinstall floor with screws removed previously.

5.If using perimeter trim that came with your mantel and it has not yet been assembled, see Assembling Perimeter Trim. Place metal trim on shoulder screws on fireplace. Firmly snap trim assembly over shoulder screws.

6.Carefully push mantel and base into position against wall.

Shoulder

Screw

Shoulder

Screw