Assembling Mantel
IMPORTANT: More than one person is required to lift assembled mantel. Lift mantel by leg assemblies. Lifting by header or mantel top could damage mantel.
Use the following illustrations to assemble mantel. Use only screws provided.
Header #4 
Right Leg
Assembly #2
Header into
Groove on 
Legs 
Header Assembly Block
11/4"
Screws
Left Leg 
Assembly #3
Figure 1 - Installing Header
Mantel
Top #5
Assembly
Blocks
11/4"
Screws
Figure 2 - Installing Top
IMPORTANT: Align mantel top left to right before installing. Back of mantel leg must be flush with back of mantel top before installation.
Right Leg
Assembly
#2Left Leg
Assembly #3
11/4"
Screws
Base #1
Flush 
Figure 3 - Installing Mantel Base
IMPORTANT: Align mantel left to right on base before install- ing. Mantel legs must be flush with back of mantel base before installation. Use a tape measure to insure accuracy.
Gas Fireplace Installation
1.Fireplace should be fully assembled. See Assembling Fireplace in fireplace owner’s manual.
2.Place mantel base close to installation location. See fire- place owner’s manual for installation clearances. Leave enough room to insert fireplace from back of mantel.
3.Install gas line. See Connecting to Gas Supply in fireplace owner’s manual. Remember to leave access to the gas shutoff valve somewhere on the base or where it is ac- cessible to the user.
4.Check for leaks. See Checking Gas Connections in fire- place owner’s manual.
5.Position fireplace inside mantel (see Figure 4, page 3). Carefully position gas lines. IMPORTANT: Use caution when positioning fireplace on base. Base may scratch easily. Make sure fireplace is in proper position within mantel opening before continuing with installation.
2 | www.desatech.com |
