Operating Heater, Installing LOG SET | Desa Tech CSNPT instruction

INSTALLATION

Continued

INSTALLING LOG SET

1.Set one-piece log on heater base as shown in Figure 12. Make sure middle section at bottom of log is seated into "U" shaped cutout in center of heater base. Log will fit securely on base. IMPORTANT: Make sure log does not cover any burner ports and does not touch the stove cavity (see Figure 14).

2.Fasten back panel to stove with four (4) bolts and washers re- moved in step 4 of Unpacking, page 6. Make sure product iden- tification label is located on the outside lower left-hand corner.

3.Place freestanding stove in desired position being careful not to damage gas connections. Be sure to maintain clearances to combustibles and wall clearances as outlined on page 7.

		One-Piece
		Log Set
		Middle Section
		at Bottom of
		Log Set
		Burner
		"U" Shaped
Heater		Cutout in
Heater	FFO	Chassis
Base

Figure 14 - Installing One-Piece Stove Log Set

Burner Porting Areas (double

One-Pieceslotted rectangular openings Log Set

Safety Pilot

Location

Figure 15 - Top View of One-Piece Log Set on Gas Log Heater

INSTALLATION	11
Installing Log Set	11
OPERATING HEATER
For Your Safety Read Before Lighting
Lighting Instructions

OPERATING HEATER

FOR YOUR SAFETY

READ BEFORE LIGHTING

WARNING: If you do not follow these instructions exactly, a fire or explosion may result causing prop- erty damage, personal injury or loss of life.

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

•If you cannot reach your gas supplier, call the fire de- partment.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service techni- cian or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING

INSTRUCTIONS

NOTICE: During initial operation of new heater, burning logs will give off a paper-burning smell. Orange flame will also be present. Open a window to vent smell. This will only last a few hours.

1.STOP! Read the safety information, abovc.

2.Make sure equipment shutoff valve is fully open.

3. Turn control knob clockwise Clockwise to the OFF position.

4.Wait five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas, STOP! Fol- low “B” in the safety information, above. If you don’t smell gas, go to the next step.

5. Turn control knob counterclockwise C-clockwiseto the PI-

LOT position. Press in control knob for five (5) seconds (see Figure 16, page 12).

For morevisit www..com

111487-01A

CSNPT specifications

Desa Tech CSNPT is an innovative technology platform that brings together cutting-edge features and capabilities to enhance performance in diverse industries. Designed for adaptability and efficiency, CSNPT stands for Customer Service Network Platform Technology, which serves as a vital tool for businesses looking to improve their customer support systems.

One of the main features of Desa Tech CSNPT is its advanced analytics capabilities. The platform integrates data visualization tools that allow organizations to gain insights into customer interactions and service performance. This information can be utilized to optimize workflows, improve response times, and enhance overall customer satisfaction. By leveraging historical data and real-time metrics, businesses can make informed decisions aimed at driving operational efficiency.

Another key characteristic of the CSNPT platform is its modular architecture. This flexibility enables companies to customize their customer service solutions according to specific needs. Organizations can easily add or modify components to create a tailored experience that aligns with their unique requirements. Whether it involves integrating new communication channels, implementing AI-powered chatbots, or automating routine tasks, businesses can scale their operations without significant overhead.

The use of artificial intelligence and machine learning is a standout feature of the Desa Tech CSNPT. These technologies enhance the platform's efficiency by automating repetitive processes and providing intelligent recommendations to support staff. For instance, AI-driven chatbots can handle customer inquiries 24/7, freeing up human agents to address more complex issues. This not only improves response times but also allows businesses to serve a larger volume of customers simultaneously.

Security is another fundamental aspect of CSNPT. Given the sensitive nature of customer data, the platform employs robust security measures, including end-to-end encryption and multi-factor authentication. By prioritizing data protection, businesses can build trust with their customers while ensuring compliance with regulations.

Overall, Desa Tech CSNPT offers a comprehensive solution that merges advanced technologies with customizable features. By empowering organizations to enhance their customer service operations, the platform paves the way for improved customer experiences and operational success. Its flexibility, analytical prowess, AI integration, and strong security make it a preferred choice for businesses seeking to innovate in customer engagement.

Desa Tech CSNPT Operating Heater, Installing LOG SET, For Your Safety Read Before Lighting

Models: CSNPT