Connecting to GAS Supply

VENT-FREE NATURAL GAS PEDESTAL STOVE

INSTALLATION

Continued

WARNING: A qualified service person must connect heater to gas supply. Follow all local codes.

Installation Items Needed

Before installing heater, make sure you have the items listed below.

•piping (check local codes)

•sealant (resistant to propane/LP gas)

•equipment shutoff valve *

•test gauge connection *

•sediment trap

•tee joint

•pipe wrench

* An CSA design-certified equipment

shutoff valve with 1/8" NPT tap is an ac-

ceptable alternative to test gauge connec-

tion. Purchase the optional CSA design-

certified equipment shutoff valve from your

WARNING: Never connect heater to private (non-utility) gas wells. This gas is commonly known as wellhead gas.

CAUTION: Use only new, black iron or steel pipe. Inter- nally-tinned copper tubing may be used in certain areas. Check your local codes. Use pipe of 1/2" diameter or greater to allow proper gas volume to heater. If pipe is too small, undue loss of pressure will occur.

Installation must include an equipment shutoff valve, union, and plugged 1/8" NPT tap. Locate NPT tap within reach for test gauge hook up. NPT tap must be upstream from heater (see Figure 6).

IMPORTANT: Install equipment shutoff valve in an accessible location. The equip- ment shutoff valve is for turning on or shutting off the gas to the appliance.

Apply pipe joint sealant lightly to male threads. This will prevent excess sealant from going into pipe. Excess sealant in pipe could result in clogged heater valves.

CAUTION: Use pipe joint seal- ant that is resistant to liquid pe- troleum (LP) gas.

We recommend that you install a sediment trap in supply line as shown in Figure 6. Locate sediment trap where it is within reach for cleaning. Install in piping system between fuel supply and heater. Locate sedi- ment trap where trapped matter is not likely to freeze. A sediment trap traps moisture and contaminants. This keeps them from going into heater controls. If sediment trap is not installed or is installed wrong, heater may not run properly.

CAUTION: Avoid damage to regulator. Hold gas regulator with wrench when connecting it to gas piping and/or fittings.

dealer. See Accessories, page 24.

Back View

		CSA Design-Certified Equipment
	From Gas Meter	Shutoff Valve With 1/8" NPT Tap*
	From Gas Meter
	(5" W.C.** to 10.5"	Approved Flexible Gas Hose
	W.C. Pressure)	Approved Flexible Gas Hose
	W.C. Pressure)	(if allowed by local codes)
		(if allowed by local codes)

Side View

Front of Stove Unit

Gas Regulator

Inlet Connection

Figure 5 - Gas Regulator Location and Gas Line Access Into Stove Cabinet

Sediment Tee Joint
Trap	Pipe		Gas
	Nipple
		3" Minimum	Regulator
	Cap
			of Heater

Figure 6 - Gas Connection

*Purchase the optional CSA design-certified equipment shutoff valve from your dealer. See Accessories, page 24.

**Minimum inlet pressure for purpose of input adjustment.

For more information, visit www.desatech.com

107434

S39NT specifications

Desa Tech S39NT is an innovative technology that has gained attention for its impressive capabilities in the realm of connectivity and performance. This device is designed to cater to the demands of both consumers and businesses, providing a seamless experience through a variety of features.

One of the standout characteristics of the S39NT is its powerful processing unit, which allows for rapid data processing and multitasking capabilities. This ensures that users can run multiple applications simultaneously without experiencing lag or performance issues. The device is equipped with advanced cooling technologies, which maintain optimal performance levels even during intense workloads.

The S39NT also boasts connectivity options that are second to none. With support for the latest Wi-Fi standards, including Wi-Fi 6, users can enjoy incredibly fast internet speeds and reduced latency, making it an excellent choice for gaming, video streaming, and other data-intensive activities. Furthermore, the device features multiple USB ports, including USB-C, enhancing compatibility with various peripherals and ensuring efficient data transfer.

In terms of storage, the Desa Tech S39NT offers an array of options to cater to different user needs. With solid-state drive (SSD) technology integrated into its design, users benefit from rapid boot times and quick access to applications and files. This not only boosts productivity but also enhances the overall user experience.

In addition to its hardware specifications, the S39NT is built on a robust software platform. It operates on a user-friendly interface that simplifies navigation and customization. Regular updates ensure that users have access to the latest features and security enhancements, protecting their data and privacy.

Moreover, the design of the S39NT reflects a modern aesthetic, combining functionality with stylish appeal. Its lightweight build makes it an ideal choice for professionals and students on the go, while its durable materials ensure it can withstand everyday wear and tear.

In summary, the Desa Tech S39NT stands out due to its powerful performance, extensive connectivity options, fast storage solutions, intuitive software environment, and attractive design. It is an ideal option for anyone looking to enhance their digital experience, combining versatility with cutting-edge technology. Whether for personal or professional use, the S39NT is engineered to meet the evolving needs of today’s users, ensuring they stay ahead in a competitive digital landscape.

Desa Tech S39NT installation manual Connecting to GAS Supply, Installation Items Needed

Models: S39NT

VENT-FREE NATURAL GAS PEDESTAL STOVE

INSTALLATION