7
Operating Your Acoustic Wave® Music System II
English Français NederlandsDeutsch Italiano
Using the remote control
The remote control allows you to fully operate all the common functions of your Acoustic Wave
®
music system II. Just aim the remote at the system and press the buttons. The remote normally
works within 20 feet from the front panel.
Notes:
• Press-and-hold operations require holding the button down for at least one second.
• Pressing FM, AM, CD, or AUX automatically turns on the system to the source selected.
Figure 3
Remote control buttons
Throughout this owner’s guide, you will see button icons to the left of the operating instructions.
These icons refer to buttons located on the remote control.
On/Off
Turns system power on or off (page 9).
Volume
Raises or lowers the volume (page 9).
Seek/Track
For FM/AM radio
•Press: Finds the next/previous radio
station with a strong signal (page 14).
•Press and hold: Rapidly moves forward/
backward through radio frequencies
with a strong signal (page 14).
For CDs
•Press: Skips to next/previous CD track
(page 10).
•Press and hold: Rapidly skips to next/
previous CD track (page 10).
Tune/MP3
For FM/AM radio
•Press: Skips to next/previous FM/AM frequency (page 14).
•Press and hold: Rapidly moves up/down through radio frequencies (page 14).
For CDs
•Press: Navigates through folders on MP3 CDs (page 11).
•Press and hold: Scans forward/backward through a CD track (page 10).
Mute
Press to silence audio. Press again to
restore audio (page 9).
FM/AM/CD/AUX
Selects the FM/AM radio, CD, or AUX
source, and automatically turns on the
system if it is off (page 9-12 & 18-19).
Presets
•Press: Recalls a stored radio station
(page 15).
•Press and hold: Stores a radio station
for quick recall (page 15).
Stop
Stops a playing CD (page 10).
Play/Pause
Plays a CD or pauses a playing CD
(page 10).
Play Mode
• Selects shuffle and repeat CD play
modes (page 12).
• Turns TALK RADIO mode on or off for
AM or FM (page 15).