18
Connecting Other Equipment
EnglishDeutschFrançaisItalianoNederlands
Connecting a recording device
To record audio programming from your system, you can connect a recording device to the
HEADPHONES jack.
To make the connection, you will need a stereo
cable (not supplied) that has a 3.5 mm (1/8") male
stereo plug on one end and the required connec-
tors for the recording device on the other end. The
example at the right shows dual RCA connectors
for the device.
Cable example: 3.5 mm (1/8") male to
Dual RCA male stereo cable
1. In the setup menu, change the HEADPHONES
JACK option from HEADPHONES to LINE
OUTPUT. See “Changing system settings” on page 20 for instructions.
2. Connect the recording device to the HEADPHONES jack using the required cable.
Using the AUX IN input
When using a TV, VCR, computer, video game or MP3 player, you can enhance your listening
experience by playing the audio output of these devices through the AUX IN input on your
Acoustic Wave® music system II.
Connecting the audio output of a device to your Acoustic Wave® music system II requires one of
the following types of stereo cables (not supplied):
• Dual RCA male to 3.5 mm (1/8") male !
stereo cable
• Dual RCA male to Dual RCA male !
stereo cable
To connect a device, like an MP3 player, to your music system:
1. Connect the dual RCA plugs of the appropriate stereo cable to the AUX IN connectors
on the rear panel of your Acoustic Wave® music system II (Figure 19).
2. Connect the other end of the cable to the audio output of the device.
3. Turn on the connected device, and then turn on your Acoustic Wave® music system II.
4. Press AUX.