IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT PRODUCT, CALL US TOLL FREE AT

1-800-4-DEWALT (1-800-433-9258).

The batteries in your new battery pack are not fully charged! First read the safety instructions, then follow charging notes and procedures.

WARNING: To reduce the risk of injury, read the instruction manual.

General Power Tool Safety Warnings

WARNING! Read all safety warnings and instructions Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

READ ALL INSTRUCTIONS

Charge the battery packs only in DEWALT chargers.

DO NOT splash or immerse in water or other liquids.

Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 105°F (40˚) (such as outside sheds or metal buildings in summer).

DO NOT probe pack with conductive objects.

Maintain clean and open vent holes.

NOTE: Review and observe all of the Important Charging Notes in the DEWALT charger instruction manual.

SPECIFIC SAFETY INSTRUCTIONS FOR NICKEL CADMIUM (NiCd) OR NICKEL METAL HYDRIDE (NiMH)

Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire.

A small leakage of liquid from the battery pack cells may occur under extreme usage or temperature conditions. This does not indicate a failure.

However, if the outer seal is broken:

a.and the battery liquid gets on your skin, immediately wash with soap and water for several minutes.

b.and the battery liquid gets into your eyes, flush them with clean water for a minimum of 10 minutes and seek immediate medical attention. (Medical note: The liquid is 25-35% solution of potassium hydroxide.)

SPECIFIC SAFETY INSTRUCTIONS FOR LITHIUM ION (LI-ION)

Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode in a fire. Toxic fumes and materials are created when lithium ion battery packs are burned.

If battery contents come into contact with the skin,

immediately wash area with mild soap and water. If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed, the battery electrolyte is composed of a mixture of liquid organic carbonates and lithium salts.

Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persists, seek medical attention.

WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame

DANGER: Electrocution hazard. Never attempt to open the battery pack for any reason. If battery pack case is cracked or damaged, do not insert into charger. Electric shock or electrocution may result. Damaged battery packs should be returned to service center for recycling.

CAUTION: Battery pack must be securely attached to tool. If battery pack is detached, personal injury may result.

NOTE: Battery storage and carrying caps are provided for use whenever the battery is out of the tool or charger. Remove cap before placing battery in charger or tool.

example, do not place battery in aprons, pockets, tool boxes, product kit boxes, drawers, etc., with loose nails, screws, keys, etc. without battery cap. Transporting batteries can possibly cause fires if the battery terminals inadvertently come in contact with conductive materials such as keys, coins, hand tools and the like. The US Department of Transportation Hazardous Material Regulations (HMR) actually prohibit transporting batteries in commerce or on airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS they are properly protected from short circuits. So when transporting individual batteries, make sure that the battery terminals are protected and well insulated from materials that could contact them and cause a short circuit.

The RBRC™ Seal

The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the nickel cadmium, nickel metal hydride or lithium ion batteries (or battery packs) indicate that the costs to recycle these batteries (or battery packs) at the end of their useful life have already been

paid by DEWALT. In some areas, it is illegal to place spent nickel cadmium, nickel metal hydride or lithium ion batteries in the trash or municipal solid waste stream and the RBRC program provides an environmentally conscious alternative.

RBRC™ in cooperation with DEWALT and other battery users, has established programs in the United States and Canada to facilitate the collection of spent nickel cadmium, nickel metal hydride or lithium ion batteries. Help protect our environment and conserve natural resources by returning the spent nickel cadmium and nickel cadmium, nickel metal hydride or lithium ion batteries to an authorized DEWALT service center or to your local retailer for recycling. You may also contact your local recycling center for information on where to drop off the spent battery.

RBRC™ is a registered trademark of the Rechargeable Battery Recycling Corporation.

Three Year Limited Warranty

DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This warranty does not cover part failure due to normal wear or tool abuse. For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-433-9258). This warranty does not apply to accessories or damage caused where repairs have been made or attempted by others. This warranty gives you specific legal rights and you may have other rights which vary in certain states or provinces.

In addition to the warranty, DEWALT tools are covered by our:

1 YEAR FREE SERVICE

DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.

2 YEARS FREE SERVICE ON DEWALT BATTERY PACKS

DC9071, DC9091, DC9096, DC9280, DC9360 and DC9180

90 DAY MONEY BACK GUARANTEE

If you are not completely satisfied with the performance of your DEWALT Power Tool, Laser, or Nailer for any reason, you can return it within 90 days from the date of purchase with a receipt for a full refund

– no questions asked.

LATIN AMERICA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained either in the packaging, call the local company or see website for warranty information.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-4-DEWALT for a free replacement.

Français

SI VOUS AVEZ DES QUESTIONS OU VOUS VOULEZ NOUS FAIRE PART DE VOS COMMENTAIRES CONCERNANT CET OUTIL OU TOUT AUTRE OUTIL DEWALT, COMPOSEZ SANS FRAIS LE : 1 800

433-9258. (1-800-4-DEWALT).

Les piles de l’ensemble ne sont pas complètement chargées. Il faut d’abord lire les mesures de sécurité, puis suivre les consignes relatives au chargement.

WARNING: Do not store or carry battery so that metal objects can contact exposed battery terminals. For

AVERTISSEMENT : afin de réduire le risque de blessures, lire le mode d’emploi de l’outil.

Page 1
Image 1
DeWalt DC9094 warranty General Power Tool Safety Warnings, Read ALL Instructions, Rbrc Seal, Three Year Limited Warranty

DC9094, DC9180, DC9099 specifications

The DeWalt DC9099, DC9180, and DC9094 are three versatile and highly regarded battery packs designed to provide reliable power for a range of DeWalt cordless tools. Each of these models features unique characteristics and innovations that set them apart in the competitive landscape of power tool batteries.

The DeWalt DC9099 is a 18V NiCad battery that delivers robust performance and longevity. It is designed with high-energy cells to ensure prolonged runtime, making it suitable for both professional and DIY projects. One of its main features is the ability to support a variety of DeWalt tools, offering great versatility for users. Additionally, the DC9099 is equipped with a rugged outer casing that enhances its durability, providing protection against drops and impacts, crucial for use in tough job site conditions.

On the other hand, the DeWalt DC9180 is a step up in technology, featuring a 18V lithium-ion battery. Lithium-ion technology offers a significant advantage in terms of weight, runtime, and battery lifespan. The DC9180 provides a longer cycle life compared to its NiCad counterparts and holds a charge longer during periods of inactivity. This battery is also designed with an integrated LED state of charge indicator, allowing users to easily monitor the battery status, reducing downtime on projects.

Finally, the DeWalt DC9094 is another notable model in the lineup, also based on 18V NiCad technology, but boasting a compact design for improved maneuverability. This makes the DC9094 ideal for working in confined spaces while still providing the necessary power to operate high-demand tools. Like the DC9099, it ensuring compatibility with a range of tools, making it a favorite among users who prioritize mobility and efficiency.

These three models collectively showcase DeWalt’s commitment to innovation and quality. The DC9099 is ideal for those who prefer the reliability of NiCad batteries, while the DC9180 highlights modern advancements in battery technology with enhanced performance characteristics. The DC9094 serves as a practical option for users seeking lightweight solutions without compromising on power. Each battery is designed to meet the rigorous demands of professional contractors and serious DIY enthusiasts, reinforcing DeWalt’s reputation for excellence in the power tools market.