DeWalt DP3700 instruction manual Installation, Pressure Washer Assembly Fig, For Future USE

WARNING: RISK OF ELECTRICAL SHOCK

WHAT CAN HAPPEN HOW TO PREVENT IT

INSTALLATION

Pressure Washer Assembly (Fig. 1)

1. Place handle assembly (A) onto frame, depress the snap buttons, and slide the handle assembly onto the frame (B) until snap buttons are secured

•Spray directed at electrical outlets or switches, or objects connected to an electrical circuit, could result in a fatal electrical shock.

•Unplug any electrically operated product before attempting to clean it. Direct spray away from electric outlets and switches.

in place.

CAUTION: Risk of personal injury. Avoid placing hands between handle and frame when assembling to prevent pinching.

2. Attach high-pressure
hose	(C)	to	quick
connect spray gun

English

WARNING: RISK OF INJURY FROM LIFTING

WHAT CAN HAPPEN HOW TO PREVENT IT

3. Connect	quick
connect	spray wand

(E) to spray gun.

4. Remove the set screw

•Serious injury can result from attempting to lift too heavy an object.

•The pressure washer is too heavy to be lifted by one person. Obtain assistance from others before lifting.

from spray gun

extension using a 3/16" hex wrench.

5. Thread the side handle

SAVE THESE INSTRUCTIONS

FOR FUTURE USE

(R) into spray gun extension and tighten to desired position.

6. Place the nozzle holder (G) onto the panel assembly (F) and push each noz- zle holder into place.

9