Sawing, Beveling, Fretwork, Inside Cuts

DW788/383329 8/6/02 10:35 AM Page 6

FIG. 7

English

MATERIAL	SPEED CONTROL KNOB
HOLD-DOWN
THUMBSCREW
ALLEN SCREW	FIG. 8
ALLEN SCREW
	ON/OFF SWITCH

PADLOCK HOLE

MATERIAL

HOLD-DOWN

Sawing

Hold material firmly against table. Always feed material toward the blade. Feed the workpiece fast enough to allow the blade to cut, but do not force material into the blade too quickly.

Beveling

The table of your scroll saw bevels 45° left and right. A detent is set at 0°. To bevel the scroll saw table, loosen the bevel lock knob (Figure 9), and bevel the table to the desired setting, indicated by the bevel pointer.

NOTE: Before tilting the table for bevel cuts of 45˚,check the clearance around the lower thumbscrew. To facilitate an accurate 45˚ cut the thumbscrew and setscrew may need to change places. On the setscrew side, sufficient clearance is available.

Fretwork

INSIDE CUTS

Your scroll saw is ideal for making inside cuts for detail work. To make an inside cut:

1.Drill a pilot hole in your workpiece.

2.Make sure the blade tension lever is moved fully to the right

3.Loosen the top thumbscrew blade clamp.

4.Leaving the blade held in place by the bottom blade clamp, lift the top arm of the scroll saw, as shown in Figure 10. Thread the saw blade through the pilot hole in your workpiece and reattach the blade by tightening the top thumbscrew.

5.Readjust the blade tension and begin the inside cut.

Alternately, you can loosen the bottom thumbscrew blade clamp in step 3 above, and thread the blade through the top of the workpiece.

DW788 specifications

The DeWalt DW788 is a top-tier scroll saw designed for both professionals and woodworking enthusiasts. Renowned for its durability, precision, and user-friendly features, this tool has gained a loyal following in the woodworking community.

One of the standout features of the DW788 is its powerful 1.3-amp motor. This motor provides ample torque and speed, allowing users to cut through a variety of materials, including hardwood, plywood, and even softer materials like plastic. The saw operates at a variable speed ranging from 400 to 1,750 strokes per minute, enabling precise control over the cutting process for intricate designs and detailed work.

The DW788 is equipped with a dual parallel-link arm system that significantly reduces vibration, ensuring smoother, more accurate cuts. This technology helps maintain the saw’s stability while in use, leading to cleaner edges and reduced strain on the user. Moreover, the arm's design allows for improved visibility of the workpiece, facilitating greater accuracy during cutting.

Another notable characteristic is the saw's blade tensioning system, which makes changing blades fast and easy. Users can quickly and effortlessly switch between different types of blades, such as reverse-tooth blades for a smoother finish or skip-tooth blades for faster cuts. This versatility makes the DW788 an all-around solution for various cutting tasks.

Additionally, the DW788 features a large, tabletop design that provides ample working space for larger projects. The 20 inches of throat capacity means that users can tackle larger pieces of wood without feeling restricted. The onboard dust blower also helps maintain visibility by keeping the cutting line clear of debris, enhancing precision.

Built with user comfort in mind, the DW788 boasts an adjustable saw arm that allows for a 45-degree angle tilt, great for making bevel cuts. The included scroll saw stand and vibration-dampening rubber feet further enhance stability and comfort during cutting sessions.

With its blend of power, precision, and user-friendly features, the DeWalt DW788 scroll saw stands out in the woodworking tool market, making it an excellent choice for anyone looking to invest in a high-quality scroll saw that can handle a wide range of projects.

DeWalt DW788 instruction manual Sawing, Beveling, Fretwork, Inside Cuts

Models: DW788