Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL, CALL US AT: 1800 338 002 (Aust) or 0800 339 258 (NZ).
Technical Data
|
| ||||
|
|
|
|
|
|
Voltage | V | 230 | 230 | 230 | 230 |
Power input | W | 2400 | 2400 | 2400 | 2400 |
8500 | 6500 | 8500 | 6500 | ||
Wheel diameter | mm | 180 | 230 | 180 | 230 |
Spindle diameter |
| M14 | M14 | M14 | M14 |
Weight | kg | 5,45 | 5,69 | 5,86 | 6,24 |
*weight includes side handle and guard
|
|
| ||||
|
|
|
|
|
|
|
LPA | (sound pressure) | dB(A) | 96 | 97 | 96 | 96 |
KPA | (sound pressure | dB(A) | 3 | 3 | 3 | 3 |
| uncertainty) |
|
|
|
|
|
LWA (sound power) | dB(A) | 107/108 | 108/108 | 107/107 | 107/105 | |
KWA (sound pressure | dB(A) | 3 | 3 | 3 | 3 | |
| uncertainty) |
|
|
|
|
|
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value ah surface grinding
ah,AG = | m/s² | 8,5 | 7,0 | 7,0 | 4,5 |
Uncertainty K = | m/s² | 1,5 | 1,5 | 1,5 | 1,5 |
Vibration emission value ah disc sanding |
|
|
| ||
ah,DS = | m/s² | 2,5/2,5 | – | – | – |
Uncertainty K = | m/s² | 1,5 | – | – | – |
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
1
