WARNING: AIR SUPPLY AND CONNECTIONS
•Do not use oxygen, combustible gases, or bottled gases as a power source for this tool as the tool may explode, possibly causing injury.
•Do not use supply sources which can potentially exceed
200 PSI (13.8 bar) as tool may burst, possibly causing injury.
•The connector on the tool must not hold pressure
when air supply is disconnected. If a wrong fitting is used, the tool can remain charged with air after disconnecting and thus will be able to after the air line is disconnected possibly causing injury.
•Always disconnect air supply:
1)Before making adjustments;
2)When servicing the tool;
3)When tool is not in use;
4)When moving to a different work area, as accidental actuation may occur, possibly causing injury.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
English
9
