Diablo Audio JP100, JP102, JP104, JP300, JP302, JP304 - page 13

CAUTION: When Input 3 is set

up as a dedicated AV connec-

tion, the Diablo’s volume control

is automatically set at a fixed

level. The signal from the sur-

round processor goes to the

Diablo power amplifier section

and MUST be calibrated and

attenuated by the surround

processor.

When DEDICATE INP.3 TO AV

appears in the display, press

Menu to select the next menu-

controlled function, if you do

NOT wish to connect the left and

right front channels from a sur-

round processor to Input 3 of the

Diablo. If you do wish to make a

dedicated AV connection, press

Monitor. WARNING! NO ATTEN-

UATION will blink in the display

for 5 seconds, after which you

will be asked to confirm that you

wish to configure Input 3 as a

dedicated AV connection which

bypasses the Diablo volume

control. ARE YOU SURE? will

appear in the first line of the dis-

play. NO and YES will appear in

the second line. NO will blink.

If you do NOT wish to make a

dedicated AV connection, press

Monitor while NO is blinking,

then press Menu to select the

next menu-controlled function. If

you do wish to make this con-

nection, press Input Up so that

YES blinks in the display. Press

Monitor. Input 3 is now config-

ured as a dedicated connection

which bypasses the Diablo vol-

ume control and should ONLY

be used with a source which has

its own volume control, such as

a surround processor. NEVER

connect a normal line-level

source such as a tuner, CD play-

er, etc. directly to this input, while

it is configured in this manner.

You can always restore Input 3

to normal operation via the

Menu.

When you have configured Input

3, DEDICATE INP.3 TO AV will

appear in the display. Press

Menu to select the next menu-

controlled function.

Exiting the Menu

When CONTINUE and EXIT

appear in the display, you can

either exit the Menu or return to

the beginning of the list of menu-

controlled functions.

To go to the top of the list, press

Monitor while CONTINUE is

blinking.

To exit the Menu, press an Input

button so that EXIT blinks, then

press Monitor to return to normal

playback and to the normal dis-

play.

13

Contents

Main Table of Contents: Introduction The Gryphon The Man Made In Denmark Musical Objectives The Gryphon Master Tape Collection Design Principles Page Exterior Design Manufacture and Assembly AC Voltage Burn-In and Warm-Up Placement Menu-activated functions Naming Inputs Setting Maximum Level Setting Start-Up Level Setting Display Brightness Restoring Default Settings Assigning Input 3 as a Dedicated AV Connection Page Subwoofer connection Link Balanced Connections Diablo Volumen control. Choice of Cables Care/ Maintenance Warranty Page USING THE OPTIONAL DIABLO /CALLISTO/ TABU/ PHONO MODULE.