Pinouts for the RJ–48C

Network Interface

Jack on Bracket

Cable Connector

8

7

6

5

4

3

2

1

8 CHASSIS GROUND

Pin 1

7CHASSIS GROUND

6CHASSIS GROUND

5XMIT_TIP

4XMIT_RING

3CHASSIS GROUND

2RCV_TIP

1RCV_RING

8.Install the snap-fit ferrite clamp on all of the external digital telephone cables as close as possible to the cables’ board connectors.

CAUTION: The ferrite clamp must be installed in order to meet EMI requirements.

Ferrite Clamp

External Digital

 

Telephone Cables

Cables

 

Connect to the

 

PCI Board

 

9.Select a new PCI slot and repeat steps 3-8 for each board you are installing.

10.Use the CT Bus cable to connect the board(s) you are installing to other boards in the system.

NOTE: Your system may include both CT Bus and SCbus boards. To connect both board types, you must install a CT Bus/SCbus Adapter on one of the CT Bus boards in a system. See the CT Bus/SCbus Adapter Quick Install Card for installation details about the Adapter and the bus cables. Contact your Dialogic® Sales Representative to order an Adapter.

11.Install CT Bus Termination Jumpers only on boards located at each end of the CT Bus cable. See Physical Description section.

12.Replace the chassis cover plate when finished and reconnect the power cords.

13.Turn the power to the chassis ON.

CAUTION: If your BIOS is set to use Plug and Play technology and there are ISA boards in your system, an IRQ conflict can be created if a DM3 board is assigned the same IRQ as an ISA board. This could cause the machine to stop responding. You can prevent this by entering the BIOS and reserving the appropriate IRQs (those used by your ISA boards) for ISA use only.

After Installing the

Hardware

After installing the Dialogic® hardware, proceed with the software installation as described in the Dialogic® System Software documentation (if applicable).

For technical specifications and product information, see the Dialogic website, http://www.dialogic.com/products.htm.

Warranty and Return

Information

Warranty Period

For specific warranty information for this board, refer to the Warranty section of the Products page, located at this URL: http://www.dialogic.com/warranties/.

Contacting Technical Support

Dialogic provides technical support for its products through a network of value added distributors who are trained to answer technical questions on installing and configuring Dialogic® products. If you are unsure how to contact your support channel, please call Dialogic in the United States at 973-967-6600 (9am-5pm EST) and we will assist in obtaining the appropriate support channel.

Outside the United States please refer to http://www.dialogic.com/support/contact to obtain local contact information. Dialogic also provides direct support via Dialogic® Pro™ Services agreements. For

more details of direct support from Dialogic please refer to: http://www.dialogic.com/support/DialogicPro.

Returning a Product

To return a board for warranty repair or any other returns, please refer to the following: http://www.dialogic.com/support/hwfaults.

Sales Assistance

If you have a sales question, please contact your

local Sales Representative or the Regional Sales Office for your area. Address, telephone and fax numbers, are available at the Dialogic website located at: http://www.dialogic.com/contact.htm.

To purchase Dialogic® products, please refer to the following website to locate the appropriate supplier: http://www.dialogic.com/purchase.htm.

All contents of this document are furnished for informational use only and are subject to change without notice and do not represent a commitment on the part of Dialogic Corporation or its subsidiaries (“Dialogic”). Reasonable effort is made to ensure the accuracy of the information contained in the document. However, Dialogic does not warrant the accuracy of this information and cannot accept responsibility for errors, inaccuracies or omissions that may be contained in this document.

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.

Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.

It is possible that the use or implementation of any one of the concepts, applications, or ideas described in this document, in marketing collateral produced by or on web pages maintained by Dialogic may infringe one or more patents or other intellectual property rights owned by third parties. Dialogic does not provide any intellectual property licenses with the sale of Dialogic products other than a license to use such product in accordance with intellectual property owned or validly licensed by Dialogic and no such licenses are provided except pursuant to a signed agreement with Dialogic. More detailed information about such intellectual property is available from Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Dialogic encourages all users of its products to procure all necessary intellectual property licenses required to implement any concepts or applications and does not condone or encourage any intellectual property infringement and disclaims any responsibility

related thereto. These intellectual property licenses may differ from country to country and it is the responsibility of those who develop the concepts or applications to be aware of and comply with different national license requirements.

Dialogic, Diva, Eicon, Eicon Networks, Eiconcard and SIPcontrol, among others, are either registered trademarks or trademarks of Dialogic. Dialogic's trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted by Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic's trademarks will be subject to full respect of the trademark guidelines published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement. The names of actual companies and products mentioned herein are the trademarks of their respective owners.

Page 2
Image 2
Dialogic DM/V960A-4T1-PCI, DM/V1200A-4E1-PCI After Installing Hardware, Warranty and Return Information, Sales Assistance

DM/V1200A-4E1-PCI, DM/V960A-4T1-PCI specifications

The Dialogic DM/V960A-4T1-PCI and DM/V1200A-4E1-PCI are advanced telecommunication interface cards designed for high-performance voice and data processing in various applications. These cards serve a crucial role in enabling seamless integration of voice, video, and data communications, making them ideal for businesses that require reliable and efficient telephony solutions.

The DM/V960A-4T1-PCI is specifically designed for T1 line connections, providing four T1 interfaces which allow users to leverage up to 96 voice channels. This card is particularly beneficial for organizations needing to handle a large volume of simultaneous calls, such as call centers and PBX systems. It offers robust voice processing capabilities, including echo cancellation, voice activity detection, and real-time conferencing features. The support for T1 lines ensures compatibility with a wide range of telephony equipment and systems.

On the other hand, the DM/V1200A-4E1-PCI focuses on E1 line capabilities, delivering four E1 interfaces for up to 120 voice channels. This card is advantageous for businesses operating in regions where E1 connectivity is standard. In addition to voice channel processing, it includes features such as multi-party conferencing and automatic gain control, which enhances overall call quality. The ability to handle multiple data streams simultaneously further enhances its value in data-centric businesses that require reliable telephony integrations.

Both cards utilize Dialogic's advanced technologies for high-density media processing, which ensures low latency and high dependability in communications. They are designed to support various signaling protocols, including ISDN, which enhances their interoperability with different telecommunications systems. Additionally, these cards come equipped with powerful onboard processors that offload processing tasks from the host CPU, resulting in improved system performance and efficiency.

In conclusion, the Dialogic DM/V960A-4T1-PCI and DM/V1200A-4E1-PCI are powerful telephony interface cards that provide essential capabilities for businesses seeking to streamline their communication systems. With their support for multiple channels, advanced voice processing features, and compatibility with a broad range of technologies, they stand out as vital components for any organization looking to enhance its telecommunication infrastructure. Whether it is for large-scale voice applications or data processing, these Dialogic cards deliver the reliability and performance necessary for modern business communication needs.