Dialogic® 4000 Media Gateway Series Integration Note

8.Microsoft® Mediation Server Installation and Configuration

8.1Installation

The gateways of the Dialogic® 4000 Media Gateway Series (DMG4000 Gateways) are shipped with pre-installed Microsoft® Mediation Server software. You can complete the Microsoft® Mediation Server configuration by running Microsoft® Office Communications Server 2007 (OCS) “Setup.exe” in the DMG4000 Gateways. In the Microsoft® OCS Deployment Wizard, select Deploy Other Server Roles, then select Deploy Mediation Sever. Follow the steps in the Wizard to complete the setup:

Step 1: Install the Microsoft® Mediation Server software.

Step 2: Activate Microsoft® Mediation Server. Use the existing account and enter the password for the service account.

Step 3: No action needed. Do this step when the installation is complete.

Step 4: Configure Certificate.

1.Download the CA certification path for Microsoft® Mediation Server.

•From Start > Run, enter http://<CA server>/certsrv

•Select to download a CA certificate, chain or CRL.

•Click Download CA certificate chain.

•In File Download, click Save.

2.Install the certificate chain for the Microsoft® Mediation Server:

•In the Deployment Wizard, run step 4 again.

• Select Import a certificate chain from a .p7b file in step 1.

3.Verify that your CA is in the list of Trusted root CAs:

•In the Microsoft® Management Console (MMC) snap-in, click Certificates (If not already done, add it.)

•Verify that CA is on the list of trusted CAs as shown in the example below.

59