Dicota 2 2.4 Set up the HyperTerminal with USB to serial port

6. Windows will ask you which port the printer will be used, choose

USB001:

(Virtual printer port to USB). (Ref. Fig.9)

Fig.9

2.4 Set up the HyperTerminal with USB to serial port

1. Make sure that HyperTerminal is installed in your system. If not,

please go to Start, Settings, and Control Panel. Double click

Add/Remove Programs, choose Windows Setup page,

Communications, click Details button and enable HyperTerminal to

install the program to your Windows system.

2. Go to Start, Settings, Control Panel, double click System, and click

on Device Manager. Check which COM port is located by USB to

serial port. (Ref. Fig.10)

Fig.10

Harbour 2.0 User’s Manual