Dicota 450 user manual InteriorInterior equipmentequip ent -- DataDeskata esk, Case lid Fig

User Manual DataDesk 450

InteriorInterior equipmentequip ent -- DataDeskata esk 450450

Case lid (Fig. 1)

(1)Document / printer paper compartment

(2)Accessory compartment with combination lock

(3)Accessory compartment

(2)

(2) (1)

Fig. 1

InstallationInstallation ofof youryour mobileobile printerprinter

Case lid (Fig. 2)

(1)Fit for your printer (HP DJ 450)

(2)Cable routing help

(3)Stow-away pocket for CD-ROM, 3,5“ FDD, etc.

(4)Stow-away pocket for printed paper

(5)Stow-away pocket for notebook power supply with plug for a Euro 8-socket (with / without ground wire)

(6)Stow-away pocket for printer power supply with plug for a Euro 8-socket (with / without ground wire)

(7)Notebook strap

(8)Flap lid (not seen in Fig.2)

(7)

(5)

		(3)
		(4)
	(1)	(6)
	(2)
		(7)
Fig. 2

Open your DataDesk 450.

1)Remove the flap lid from the bottom part of the case, which functions as your Notebook workspace.

2)Place the printer power supply in the front pocket of the bottom part of the case (pocket No. 6).

3)Now connect the Euro 8 plug with the 220 V socket of the power supply (in pocket No. 6).

4)Route the printer power cable through the designated groove (under the flap lid) and sideways past the printer (Fig. 3).

Pay attention to a clean cable routing to prevent damaging the printer cable (e.g. by pinching it off)!

5)The power supply outlet plug is now connected to the printer.

Fig. 3

7