Reset Switch
The reset switch, located between P3 and CR1, does the following (depending on how long you hold the switch down):
•It reboots the Digi One EM if you press and release the switch immediately.
•It reboots the Digi One EM and restores the configuration to factory defaults. (Press and hold the switch down for about 20 seconds while powering the Digi One EM up.)
LEDs
Digi One EM LEDs provide information on port activity, diagnostics, and Ethernet activity.
LED | Color | Function | Interpretation | |
|
|
|
| |
|
|
| • Off means that the serial | |
Top left | Green | Indicates serial | channel is idle. | |
port activity | • Blinking indicates an | |||
|
| |||
|
|
| active connection. | |
|
|
|
| |
|
|
| • Off means that no link | |
Top | Green | Network link sta- | has been detected. | |
right | tus | • On means that a link | ||
| ||||
|
|
| has been detected. | |
|
|
|
|
Digi One EM Hardware Reference | 11 |
