Digicom SNM50 manual V34+ 33.6 professional modem, VA via Alessandro Volta

	de
o		m	/
M
			F
N			a
			x
T
S
P

Telematics

SNM50

V34+ (33.6) professional modem

SNM50 modem and its card version SNM54 for RMC2x Switched HUB, are high performing telematic solutions for data transmission in all professional applications; they have been projected to suit with any information system, from Personal Computers to MacIntosh systems, to Local Network Servers or Unix or Mainframe and allow communications up to 33.600 bps on any switched or 2 and 4 wires leased line, both for local and long distance lines.

Thanks to the supported modulation standards SNM50 is a real multistandard, which is able to communicate with any other modems in conformity with ITU-T regulations; it works in full/ half duplex with V13 support and also in digital multipoint applications.

It’s perfect for all synchronous and asynchronous applications, client side or server side; SNM50 has got special features that allow to solve applicative problems other modems can hardly work out:

λautomatic back-up and restore of point to point and multipoint leased connections

λback-up management on modems pull

λclock/calendar

λprogrammable agenda

λinternal telephone book

λsecurity management with programmable procedures and password

λdial-in/dial-out management client and server side

λclient and server side call back

λclient and server side extended call back

λ100 items of telephone book associated to security, call back and special programmings

λ20 programmable configurations in memory

λcharacter teleprogramming

λtele download of complete configuration

λmanagement by digicom MSS01 for back-up-restore and dial-in/out applications

λV54 diagnostic

λflash eprom for upgrade of new functions

λAT call compatible with extended command set

λV25bis HDLC call mode with ASCII codes (for AS400 and IBM Mainframe)

λasynchronous working from 300 to 33600 bps with all formats up to 11 bit

λsynchronous working on all speeds from 1200 to 33600 bps

λauto-adapting line speed according to error rate

λmain and command port for special dual DTE applications (through proper cable)

SNM50 is a modem growing according to the customer’s needs; it is compatible with SLIP and

PPPapplications in Internet but also with access solutions to private networks with Remote Access Server of Windows NT or similar solutions in

Novell, Unix and IBM AS400 or Mainframe environments.

The rack Switched HUB with SNM54 is a very good solution for Internet Provider thanks to its multistandard support up to 33600 bps.

In 5250(AS400) or 3270(Mainframe) synchronous environments, the product can support both switched applications and leased ones with back-up and management.

VA via Alessandro Volta 39	http://www.digicom.it
digicom S.p.A. -ITALY- 21010 Cardano al Campo	Tel. +39/331/702611 - Fax +39/331/263733 -

THIS DOCUMENT IS SUBEJCT	SNM50 05/11/98
TO CHANGE WITHOUT NOTICE