| ac |
N | B |
| |
D |
|
S |
|
I |
|
kU
p
SNT09 is programmable not only through AT commands like a modem but also through MSS01, the management system for leased lines, modems and ISDN that Digicom offers to monitor, prevent and correct any fault on geographic network.
Every event is saved in a shared file on dbf format. This gives the possibility to verify and analyse the network condition, also in LAN with more management stations located in different sites.
The graphic visualization is completely developed in Windows but other functions are flanked as Telnet emulation to act on every single device with direct commands, the interpretation of the ACD frame of the CDN network, the support to the V54 for loops activation, the accounting of the back up activities and the back up simulation to verify the good operating of alter- native routing and quantify costs.
TECHNICAL FEATURES
lISDN
lTeleprogrammable.
lClock and calendar functions.
lCall back and extended call back with password exchange.
lManagement System monitoring.
l
lRate adaption: V110, V120.
lV42bis data compression.
lAT commands and V25bis in syncronous HDLC and asyncronous.
lSyncronous operation up to 64 Kbit.
lAsyncronous operation up to 115.2 Kbit.
lSecurity function by caller identification (Caller ID support).
lISDN Multinumber Service (MSN).
lSubaddressed ISDN Service (SUB).
lCaller identification ISDN Service (CLIP).
lLine interface on RJ45 connector for bus S/T.
lV24, V28 or V35 serial interface by adapting cable.
lPower supply 220V monophase 50 Hz.
lConsumption: 10W.
lTemperature range from
lMaximum operational humidity tax at 90%.
lDesk top dimensions: 190 x 147 x 45mm.
lRackmount version dimensions: 4 units in height and 19" in width per rack.
lDesk top weight: 150 gr.
PRODUCT | CODE | DESCRIPTION |
|
|
|
SNT08/T | 8D5389 | V34 modem/fax and ISDN TA 2B+D (B2 on modec or adapter A/B) with RJ11 port for analogic connectivity, V110, V120, |
|
| V42bis, MNP10, V25bis and AT compatible, EuroISDN, PTT approuved. |
|
|
|
SNT08/R | 8D5398 | V34 fax modem and ISDN TA 2B+D (B2 on modec), V110, V120, V42bis, MNP10, V25bis and AT compatible, Euro |
|
| ISDN, rack version PTT approuved. |
RMC27 | 8D7069 | Rack for 12 SNT09R and 1 power supply. |
RMC28 | 8D7070 | Rack for 10 SNT09R and 2 power supply. |
PSU27 | 8D6058 | Power supply for RMC 27 and RMC 28. |
CR25 | 8D4186 | Connecting cable between SNT09 and NT1 or a BUS S/T. |
CD24/0,5 | 9D0491 | Adapting cable for V35 interface to be used with SNT09. |
CM5 | 8D5401 | V35 interface adapter without cables to be used with SNT09. |
THIS DOCUMENT IS SUBEJCT TO CHANGE WITHOUT NOTICE
digicom S.p.A. | SNT09 17/02/97 |
