Item No. TC-370, Charging Instructions

Item No. TC-370

DIGITAL CAMERA / CAMCORDER ULTRA FAST RAPID

WORLD TRAVEL CHARGER

Thank you for purchasing our DigiPower Lithium-Ion Ultra Fast Rapid Charger. This unique charger now makes it convenient for you charge your batteries with almost any AC power source in the World without having to add country specific pass through adapters.

The Travel Charger comes equipped with a patented, integrated World AC plug that allows you to use your Charger around the world in: England, Europe, North America, South America, China, Asia, Australia, and New Zealand.

Charging Instructions:

A. For Charging Battery Types:

NP-20or BP-NP20

NP-40or BP-NP40

NP-60or BP-NP60

NP-200or BP-NP200

1The TC -370 Charger is equipped with a battery adaptor plate.

2. This adaptor plate has two sides.

Each side is labeled with battery types to be used. Side 1 is for NP-40, NP -60 and NP-200 battery types. Side 2 is for NP-20 battery type.

No plate is needed for NP-120 battery type.

3.The plate can be removed from the charger unit, and inserted with either side facing out, depending on the type of battery you are charging.

4.Remove the plate by pushing it out with your thumb or finger just above the LED.

5.When charging any of the batteries listed above (NP-20, NP-40, NP-60 or NP-200) you must face the side of the adaptor plate labeled with your battery type out and the arrow pointing up toward the LED.

6.You must insert the adaptor plate by placing it almost all the way in and then clicking it into place along the grooves. Then push the plate the rest of the way in so it locks into place.

7.DO NOT slide the plate all of the way in the charger without first clicking it into the grooves as it will not be set properly and your battery will not charge.

8.Once you have inserted the plate correctly, you may insert your battery for charging. Make sure to face the battery out and have the contacts facing in towards the contacts on the charger.

9.Plug the charger in.

RED LED = unit is charging battery

ORANGE LED = trickle charge (battery is 80% full) GREEN LED = battery is fully charged

Allow 2 hours for full charge.

B. For Charging Battery Type:

NP-120or BP-NP120

1.Remove adaptor plate from charger.

2.Place NP-120 battery in charger with face up and contacts facing the contacts in the charger.

3.Plug the charger in.

RED LED = unit is charging battery

ORANGE LED = trickle charge (battery is 80% full) GREEN LED = battery is fully charged

Allow 2 hours for full charge.

Instructions for Adjusting the

Multi-Country Plugs:

A.North America

1.Locate the black button / latch at the base of the charger where the North American / Australian Plugs are embedded.

2.Release the North American / Austrailian plug by pressing down on the button / latch. Continue to push the North American Plug upward until it is in a 90 degree position

DigiPower manual Item No. TC-370, Charging Instructions

Models: TC-370