5
a. INSTALLATION TOOLS
The following tools are required for installation:
• Standard wrench and philips head screwdriver
• Standard drill with ½” bit (optional)
• Cellular phone operating on 800 or 1900 MHz bands (any USA or Canadian
cellular phone except Nextel)
• Wire fasteners (optional)
• Multi-meter for testing electrical continuity and AC and DC line voltage (for
troubleshooting only)
b. INSTALLATION PROCEDURE
Description of DA4000SBR System
The DA4000SBR Dual Band Wireless Amplifier/Repeater system provides cellular
signal coverage to areas that have low signal strength to adequately operate a cellular
phone. In these poor coverage areas it becomes difficult to place or receive calls and
usually results in a dropped call. The DA4000SBR dual band amplifier/repeater system
provides increased reception indoors by filtering, re-directing and amplifying the
available signal. This translates into fewer dropped calls, safe, clear connections and
stronger signals. The DA4000SBR dual band system operates with all carriers in the USA
and Canada except Nextel. A
Functional Operation of DA4000SBR System
Installation requirement: Separation Distance of 40' or more between outside and inside antennas
Cell Site
P/N C277-30
50' Cable P/N 135-RD
Inside Antenna
P/N DA4000SBR
Amplifier/Repeater Unit
Cell Signal -90 to -70 dBm
Cell Signal degraded
by exterior wall, distance
trees & foliage, etc....
Cell Signal re-broadcasted
inside building through
DA4000SBR system
The DA4000SBR system contains a dual band low power indoor antenna,
amplifier/repeater unit and high gain omni-directional outdoor antenna. Both antennas
must be installed and operate in a vertical position. The indoor antenna must be used with
cable and stand. The outdoor omni-directional antenna, P/N 288-PB, is installed outside
wpsantennas.com
Digital Antenna, Inc Dealer / Master Distributor
(877) 594-5766