Nautilus Specifications | Dimension One Spas |
Nautilus
Architectural Specification
27 in [67 cm]
Recommended location for
Electrical Inlet
11 in [28 cm]
Hose Bib/
Water Drain
16 in [41 cm]
16 in [41 cm]
Top View of Spa
THIS 3 FOOT SQUARE AREA,
ON BOTTOM OF SPA, TO BE
SUPPORTED CONSISTENT WITH | Subwoofer |
THE EDGES OF SPA BASE. |
|
See Note 5
Equipment
Compartment
R16 in [R41 cm]
91 1/2 in [232 cm]
Shell
See Caution
91 in [231 cm]
Skirt
89 in [225 cm]
Pedestal
Base
Hose Bib/
Water Drain
3 1/2 in [9 cm]
Vent
Vent 
23 1/2 in [60 cm]
Vent | 34 1/2 in [88 cm] |
| |
| 56 1/2 in [143 cm] |
| 67 1/2 in [171 cm] |
91 1/2 in [232 cm]
Control
Spa Lip
Front View of Spa
35 1/2 in [90 cm]
32 in [81 cm]
Pedestal Base |
| |
Door Extends | 16 in [41 cm] | |
Under Spa Lip | ||
| ||
75 in [191 cm] |
| |
89 in [225 cm] |
| |
91 in [231 cm] |
|
Note: Subject to change without notice.
1.Stereo/subwoofer optional.
2.Engineering specs may differ slightly from brochure.
3.For
4.Alternative cabinets may add significant weight. Ask your dealer for exact details
5.This is the approximate location for drilling a hole if you must bring the power line in through the bottom of the spa. Be careful not to puncture a plumbing line inside the equipment compartment(drill from the inside compartment out).
Caution:
Due to manufacturing tolerances there could be some
minor differences between the actual spa and the drawing above.
If site planning is critical to such tolerances, be sure to measure your actual spa.
Doc1480- Rev | Specification, Nautilus | Page 2 of 2 |
