INSTALLATION
MANUAL CONTROL
FIGURE 4
FIGURE 5
MANUAL CONTROL REMOVAL
1.Open steel curtain (remove glass doors if applicable).
2.Remove two screws on log grate and remove log grate (FIGURE 4).
3.Pull front edge of plastic ember bed grate up and forward until rear tab releases from the ledge located at the bottom of the mirror. (FIGURE 5)
Note: Log set fits tightly into firebox, some force may be necessary to remove. (FIGURE 5)
4.Locate and remove the two screws on the manual control bracket. Remove the bracket. (FIGURE 6)
5.Locate and depress the mounting tabs on the plug connector and remove the manual control bracket. (FIGURE 6)
REMOTE CONTROL INSTALLATION
1.Locate and insert the plug connector on the remote control bracket into plug connector on the fireplace. FIGURE 7)
2.Locate and install the two screws on the remote control bracket.
3.Replace the log by inserting front edge and pushing the back down until rear tab snaps under back ledge (FIGURE 5) and the logs are resting against mirror.
4.Replace log grate using two screws previously removed.
DEPRESS MOUNTING | PLUG CONNECTOR |
TABS |
|
PLUG CONNECTOR
MANUAL CONTROL
REMOTE CONTROL
FIGURE 6 | FIGURE 7 |
