5.The
6.When installing into two studs the wall anchor must be installed into the center location as indicated in FIGURE 3.
7.When installing into one stud, use one of the three center locations as indicated in FIGURE 4. The wall anchors must be installed into the outer most locations as indicated in FIGURE 4.
8.Hold the
9.Install the bubble level onto the top of the
10.Adjust the
11.Mark two other mounting screw locations on the wall bracket ensuring that the wall bracket stays level.
12.Drill ½” holes into the wall on the marked locations where the wall anchors are to be installed. (FIGURE 1)
13.Insert the wall anchor screws through the wall bracket and thread into the wall anchors. The screws should extend beyond the wall anchors.
(FIGURE 2)
14.Squeeze the wall anchor together and insert the wall anchors into the ½” holes in the wall. Tighten the screws. (FIGURE 2)
15.Install the remaining screws into the wall studs as required.
Note: At least one of the mounting screws must be installed into a wall stud.
3