Resetting the Temperature Cutoff Switch

RESETTING THE TEMPERATURE CUTOFF SWITCH

Should the heater overheat, an automatic cut out will turn the heater off and it will not come back on without being reset. It can be reset by switching the MAIN ON/OFF SWITCH to OFF and waiting 5 minutes before switching the unit back on.

CAUTION

If you need to continuously reset the heater, unplug the unit and call Dimplex customer service at 1-888-DIMPLEX (1-888-346-7539).

MAINTENANCE

WARNING

Disconnect power before attempting any maintenance or cleaning to reduce the risk of fire, electric shock or damage to persons.

LIGHT BULB REPLACEMENT

Allow at least 5 minutes for light bulbs to cool before touching bulbs to avoid accidental burning of skin.

Light bulbs need to be replaced when you notice a dark section of the flame or when the clarity and detail of the log exterior disappears. There are two bulbs under the log set which generate the flames and embers.

TOOL REQUIREMENTS

Slot screw driver

HELPFUL HINTS

It is a good idea to replace all light bulbs at one time if they are close to the end of their rated life. Group replacement will reduce the number of times you need to open the unit to replace light bulbs.

LOWER LIGHT BULB REQUIREMENTS

Quantity of 3 – 35 Watt Clear Halogen Lamps, 120 Volt, G9 base. DO NOT EXCEED 35 WATTS PER BULB.

LOWER BULB REPLACEMENT

1.Unplug the unit from the outlet.

2.Remove the two mounting screws from the bottom front of the heater assembly. (FIGURE 2)

3.Loosen but do not remove the four heater and light assembly mounting screws located on the bottom sides of the wall mounted electric fireplace. (FIGURE 2)

4.Slide the heater and light assembly forward to release it from the bottom of the wall mounted electric fireplace

		(FIGURE 1).
	5.	Place heater and light assembly on a flat surface and
		examine the bulbs to determine which bulb(s) required
		replacement
	6.	Remove the burnt out bulb(s) by gently pulling straight
		out of socket. If bulbs are difficult to remove from socket
FIGURE 1		move the bulb from side to side while pulling being
FIGURE 1		careful not to damage the light socket.
	7.	Insert new bulb(s).
	8.	Install the heater and light assembly onto the four
		mounting screws.
	9.	Slide the assembly backwards to lock it into position.
	10. Tighten the four heater and light assembly mounting
		screws.
FIGURE 2	11. Install the two front mounting screws.
FIGURE 2	12. Plug in the wall mounted electric fireplace.		7
			7

EWM-SS specifications

The Dimplex EWM-SS is a state-of-the-art electric wall-mounted heater that is designed to deliver optimal heating solutions for modern homes. With its sleek and stylish stainless steel finish, the EWM-SS not only serves the practical purpose of providing warmth but also adds a touch of elegance to any living space.

One of the standout features of the Dimplex EWM-SS is its compact design which makes it an ideal choice for small spaces, such as apartments, offices, and even bathrooms. Its wall-mounted configuration saves valuable floor space while still offering powerful heating capabilities. The unit is also lightweight, making installation straightforward and adaptable to various wall types.

Central to the performance of the EWM-SS is its innovative fan-assisted heat distribution technology. This system ensures that warmth is evenly distributed throughout the room, eliminating cold spots and providing a comfortable environment. The adjustable thermostat allows users to set their desired temperature, while the built-in timer can be programmed to turn the heater on and off at specific times, ensuring energy efficiency and convenience.

Safety is a primary consideration in the design of the Dimplex EWM-SS. It is equipped with an overheat protection feature that automatically shuts off the unit if it overheats, providing peace of mind in both residential and commercial settings. Additionally, the heater is constructed from high-quality materials, ensuring durability and long-term performance.

Another significant characteristic of the EWM-SS is its silent operation. Unlike traditional heating systems that can be noisy, the fan-assisted system operates quietly, allowing it to blend seamlessly into any environment, whether you are working, relaxing, or sleeping.

The Dimplex EWM-SS not only excels in functionality but also emphasizes energy efficiency. The electric heater provides instantaneous heat without the need for heating spaces that are not in use. This enables homeowners to manage their energy consumption effectively while still enjoying comfort.

In summary, the Dimplex EWM-SS is an exceptional heating solution that combines aesthetics, functionality, and efficiency. With its fan-assisted technology, adjustable settings, safety features, and sleek design, it stands out as a top choice for anyone seeking reliable and stylish heating solutions for their space. This heater is an investment in comfort, safety, and energy efficiency for any home or office environment.

Dimplex EWM-SS manual Resetting the Temperature Cutoff Switch, Maintenance

Models: EWM-SS