Steam vacuum operating procedure

1Switch mode switch fl to position II.

• Mode 2 switches on the boiler heater and enables the handle control (i.e. steam, vacuum and detergent switches).

2Remove the top cover of the collection tank ‡ and pour clean cold water into the tank up to the white mark (approx 1 litre).

3Replace top cover on the collection tank.

4Fill the Cold water tank ¤ with clean water.

5Connect the Solution tank hose to the chemical point ⁄ on top of the machine if required.

•Fill the Solution tank with the recommended detergent as required.

6Connect vacuum hose and steam hose to the front of the machine.

•Ensure both parts are locked in position.

•To release the vacuum hose slide back the red button.

•To release the steam hose lift the steam

flap before pulling out the hose.

7Plug in machine cord to socket.

8Ensure steam mode II is selected on mode switch fl.

9Switch on power switch fi, "Heater On" light will illuminate.

10Allow approximately 10 minutes for the boiler to heat the water.

11When the "Steam Ready" LED illuminates the operator can commence steam cleaning.

12The handle controls are active and the

operator can switch on and off the steam, vacuum and detergent supply.

•Depressing the large button under the handle will release the steam. This button can only be locked in the off position - slide the red button across to lock.

•Pressing the left hand switch (with fan symbol) located on the top of the handle will activate the vacuum.

•Pressing the right hand momentry switch located on the top of the handle will activate the detergent pump. Hold

the switch for as long as you need to dispense the detergent. Releasing the switch will stop the detergent supply. Note: steam and detergent cannot be used at the same time.

13 The steam output can be adjusted by the Steam Control knob ‹ on the top of the machine.

14 The vacuum power can be adjusted by the Vacuum Control knob › on the top of the machine.

15 Choose and fit the required accessory to the hose handle. Lock the accessory in place by turning the accessory locking clip.

During use

Cold Water Tank empty

1Refill the cold water tank when the "Cold Water Refill" LED is illuminated, a buzzer sounds and steam no longer comes out of the nozzle when the steam switch on the handle is pressed.

2Always empty the collection tank each time the cold water tank is refilled.

3Pour cold water in to the collection tank to fill up to the white mark.

4The pumps and vacuum will not operate if the cold water tank is empty.

5Once the "Cold Water Refill" LED is activated the boiler heater will remain on for 30 minutes. If the cold water tank is not refilled within 30 minutes and the machine is left powered ON the boiler heater will switch off.

Solution Tank empty

If the detergent does not come out of the nozzle when the detergent switch on the handle is pressed - refill the "Solution" tank.

Collection Tank full

1The collection tank must be emptied each time the cold water tank is refilled

2The pitch of the motor noise changes and there is no suction at the nozzle - indicates the collection tank is full and needs emptying.

6

Page 5 Page 7
Page 6
Image 6
Dimplex SV8000 manual During use, Cold Water Tank empty, Solution Tank empty
Page 5 Page 7

SV8000 specifications

The Dimplex SV8000 is a cutting-edge electric heater, designed to offer efficient heating solutions for various residential and commercial spaces. With its elegant design, advanced technologies, and user-friendly features, the SV8000 stands out as a top choice for those seeking comfort and energy efficiency.

One of the primary characteristics of the Dimplex SV8000 is its high thermal efficiency. Utilizing innovative heating technology, this model ensures rapid warmth distribution in any room. The heater features a powerful fan to circulate warm air effectively, allowing it to heat spaces quickly and evenly, providing optimal comfort during colder months.

The Dimplex SV8000 is equipped with a digital thermostat that allows for precise temperature control. Users can easily adjust settings to maintain their desired comfort level, ensuring that energy is not wasted. The advanced control panel is intuitive, featuring a clear display that simplifies the user experience. With programmable timers and settings, the heater can be set to operate only when needed, contributing to lower energy bills.

Another standout feature of the Dimplex SV8000 is its safety technology. It includes overheat protection and a tip-over switch, which automatically shuts off the heater if it is knocked over or reaches unsafe temperatures. This adds an essential layer of safety, especially in environments with children or pets.

The design of the Dimplex SV8000 is both modern and functional. Its sleek exterior allows it to blend seamlessly with various interior styles while occupying minimal space. The compact size makes it suitable for installation in tight spots, such as under windows or in small rooms, without sacrificing heating performance.

This model also features a whisper-quiet operation, making it ideal for bedrooms, offices, or any area where noise disruption is a concern. The SV8000 is designed to provide cozy warmth without the distracting hum of traditional heating systems.

In summary, the Dimplex SV8000 is a powerful, efficient, and stylish heating solution. Its combination of digital controls, safety features, and quick heating capabilities makes it a standout option for both homeowners and businesses. With its commitment to energy efficiency and user-friendliness, the SV8000 represents a reliable choice for comfortable indoor climates year-round.
Top Page Image Contents