INSTALLATION GUIDELINES

1.Please read this owner’s manual carefully before installing this ampli- fier.

2.Disconnect the battery ground terminal prior to making any elec- trical connections.

3.Check for any hazards or obstruc- tions such as gas tanks, fuel or brake lines, and wiring harnesses before mounting the amplifier.

4.Pick a mounting location that will provide adequate access and venti- lation and protect the amplifier from heat, moisture, and dirt.

5.Avoid sharp metal areas when routing cables to the amplifier, and run RCA cables away from the power cables and other potentially noisy car harnesses.

6.The amplifier should be grounded with a short, heavy gauge wire connected directly to the car at a bare metal surface, preferably scraped body sheet metal. Do not use factory ground locations, seat bolts, or brackets that are spotwelded.

7.Always fuse your power connection within 8 to 10 inches of the battery

terminal. Use a fuse or circuit breaker rated slightly more than the on-board fuse(s) of the amplifier(s). The gauge of power wire used should take into account the total current draw of the system, and the length of wire used. IASCA and other auto sound competition organizations have charts available for this; you can also find a chart in the MECP study guide. Minimum wire gauge recom- mendations for the individual ampli- fiers are listed on the specification page. Always use the same gauge wire for the amplifier ground that you use for the power wire. Be sure to examine the battery ground cable of the vehicle, and if neces- sary, upgrade it by adding an addi- tional ground wire that is the same gauge as the amplifier’s power wire. Remember, the amplifier can only deliver its rated output when it is not current limited by the power and ground supply wires.

8.This amplifier is designed to drive a speaker load that measures from 2 to 8 ohms. Keep in mind that heat is the long-term enemy of automo- tive electronics and the lower your

© 2002 Directed Electronics, Inc

5

Page 5
Image 5
Directed Electronics 2400 manual Installation Guidelines

2400 specifications

Directed Electronics 2400 is an advanced vehicle security system designed to provide robust protection for your automobile. Renowned for its reliability and user-friendly features, the 2400 series integrates modern technology to enhance safety and convenience for drivers and owners alike.

One of the standout features of the Directed Electronics 2400 is its two-way communication capability. This allows users to receive confirmation signals directly on their remote, ensuring that their commands, such as locking or unlocking the doors, have been executed successfully. This feature not only improves user confidence but also adds a layer of convenience by keeping drivers informed about their vehicle’s security status.

Incorporated within the Directed Electronics 2400 is the advanced shock sensor technology. This system detects any impact or vibrations, triggering an alarm if potentially harmful activity is suspected. This cutting-edge technology allows for variable sensitivity settings, enabling users to adjust the alarm's responsiveness according to their preferences or surrounding environmental factors.

Another fundamental aspect of this system is its compatibility with smart technology. The Directed Electronics 2400 can sync with smartphones via an application, providing users with the ability to control their vehicle’s security remotely. With this feature, you can arm or disarm the system, track your vehicle's location and even receive alerts on suspicious activity, all from your mobile device—an essential convenience in today’s fast-paced world.

The Directed Electronics 2400 also features a comprehensive anti-theft system that includes a starter immobilizer. This technology prevents the vehicle from being started without the proper remote, making it significantly more challenging for thieves to steal the car.

Installation of the Directed Electronics 2400 is designed to be user-friendly, with detailed instructions and support provided by the manufacturer. Furthermore, this system comes equipped with a battery backup, ensuring that the security features remain operational even if the vehicle's power is compromised.

In terms of aesthetics, the Directed Electronics 2400 is designed with a sleek remote that is both stylish and practical. The ergonomic design of the remote makes it easy to handle, while the intuitive button layout assists users in navigating through functions smoothly.

Overall, the Directed Electronics 2400 stands out in the vehicle security market due to its advanced features, reliable technology, and user-friendly design. It serves as an excellent choice for any vehicle owner looking to invest in the protection and security of their automobile.