volume of the system and affects all line level outputs to the amplifiers.

Fader - To set the master volume/ fader control knob to the fader posi- tion, pull gently on it until a notched position is reached. It will then control the front-to-rear balance of the front and rear RCA output jacks.

WARING! DO NOT use excessive force when using this knob or damage to its release mechanism may result.

2.Power On/Off LED - This LED will be illuminated when the 2500 is on.

3.Input Source Switch - The input source switch selects between Source 1 and Source 2 inputs.

FIGURE 2—CONTROL PANEL

4Subwoofer Volume Control: The subwoofer volume control knob controls the volume of the dedi- cated subwoofer output.

5.Subwoofer Frequency Control - The subwoofer frequence control knob controls the low-pass crossover frequency for the dedicated subwoofer output between 30- 300Hz at 12dB/octave.

6.Frequency Controls - The frequency control knobs control the gains for their respective frequencies. The center position is flat with a maximum +18dB and -18dB adjustment capability.

1

2

3

4

5

6

© 2002 Directed Electronics, Inc

9