H1/3 BLUE Driver-Side Up Motor Input: Cut the driver-side up wire at the switch (see NOTE on page 1) and connect this wire to the motor side of the up wire.
H1/4 RED (+)12V Constant, 20A Fused: Connect to a fused source of constant 12V. Make sure to connect this wire to a 12V source capable of handling high current draw, such as the ignition harness or the battery.
H1/5 BLACK (-) Chassis Ground: Connect this wire to a paint-free surface on the vehicle chassis. Use a factory
bolt if possible.
IMPORTANT! Do not ground the 530T to the vehicle door. The 530T requires a solid ground to func- tion properly, and the door hinges do not provide sufficient ground to the vehicle’s chassis.
H1/6 VIOLET/BLACK Passenger-Side Ground Path Input: This wire provides the ground path for the passenger- side motor. Connect this wire to a paint-free surface on the vehicle chassis. Use a factory bolt if possible.
H1/7 GREEN/BLACK Passenger-Side Down Motor Output: Cut the passenger-side down wire at the switch (see NOTE on page 1) and connect this wire to the motor side of the down wire.
H1/8 BLUE/BLACK Passenger-Side Up Motor Output: Cut the passenger-side up wire at the switch (see NOTE on page 1) and connect this wire to the motor side of the up wire.
Light Gauge Harness (H2) Wire Connection Guide
| ______ |
H2/1 |
H2/2 | ______ |
H2/3 | ______ |
H2/4 | ______ |
H2/5 | ______ |
H2/6 | ______ |
H2/7 | ______ |
| |
BROWN | DRIVER-SIDE UP SWITCH INPUT |
| |
| |
WHITE | DRIVER-SIDE DOWN SWITCH INPUT |
| |
| |
RED/WHITE | (-) AUXILIARY INPUT |
| |
| |
ORANGE | (-) GROUND WHEN ARMED |
| |
| |
GRAY | (-) OUTPUT DURING ACTIVATION |
| |
| |
BROWN/BLACK | PASSENGER-SIDE UP SWITCH INPUT |
| |
| |
WHITE/BLACK | PASSENGER-SIDE DOWN SWITCH INPUT |
| |
H2/1 BROWN Driver-Side Up Switch Input: Connect this wire to the driver-side switch of the up wire.
H2/2 WHITE Driver-Side Down Switch Input: Connect this wire to the driver-side switch of the down wire.
H2/3 RED/WHITE (-) Auxiliary Input: Connect this wire to a (-) validity channel output of the security system.
H2/4 ORANGE (-)Ground-When-Armed:Connect this wire to the (-) ground-when-armed output of the security system. This wire can also be connected to an auxiliary channel of the security system to roll the windows up.
© 2000 Directed Electronics, Inc. | 5 | N530T 1/00 |
| |
