AUTOMOTIVE
INFRARED
STEREO
HEADPHONE
Model HP400
User’s Manual
© 2004 Directed Electronics, Inc. | N88400 10/04 |
Introduction
Congratulations on your purchase of the sophis- ticated,
Special Features
z40mm drivers for improved bass response.
zAutomatic Level Control to prevent input signal overloading.
zUtilization of
zAdjustable headphone band.
zAutomatic power OFF (after a few minutes without a signal source, the power to the headphones will automatically turn off).
Explanation of Controls
1.Infrared Pickup Sensors - The head pone receives audio signal from infrared transmitters.
2.Battery Cover
3.Volume Control
4.Power Switch
5.Power Indicator LED
Battery Installation
Place 2 alkaline AAA batteries into the battery com- partment of the headphones. Make sure that the batteries are installed with the correct polarity.