Directed Electronics OHV12202 Power Up/Down the Display Monitor, PICTURE-IN-PICTURE/SPLIT Screen

Power Up/Down the Display Monitor

The unit will power up when the display monitor is unlatched and pulled down. (If the unit does

not power up, press the Power button on either the remote or the Power button on the right side of the monitor.

To turn the power off to the unit, press the POWER button on the remote. The power will also shut Off when the display monitor is placed in the closed and latched position.

If the hand icon or “INVALID KEY” displays in the upper left-hand corner of the screen when using the remote, it indicates that the command issued is not allowed during the mode that the monitor display is presently in, or is not available on this system.

P (PICTURE-IN-PICTURE/SPLIT SCREEN)

Select this feature by pressing on the remote or the P button on the monitor to display

PIP or Split Screen viewing of a total of two inputs from the DVD, or the A/V inputs. When the sys- tem is in PIP or Split Screen mode, the source feature described below only works on the small inserted picture or on the split picture displayed on the right side of the monitor (if the optional DVD player is installed).

NOTE: The switch on the HP200 headphones allow the listener to switch between the two pictures (PIP or Split Screen). The IR button on the remote turns the audio to the headphones On/Off.

SOURCE (MODE)

Press the (SOURCE) button on the remote or the S button on the monitor to select the

input signal AV1, AV2 (or the optional DVD player or Hard Disk drive, if installed).

14 © 2005 Directed Electronics, Inc.