Directed Video CD1020

NOTE: Specifications and design are subject to change without notice.NOTE: The unit will automatically power off once the ACC is turned off (ignition key off).Ensure that the RED (+ACC) wire is connected to ACC power.

System

Laser (If DVD is installed) Semiconductor laser

Signal Formats NTSC, PAL

Audio Characteristics

Frequency Response

(If DVD is installed)

DVD Video (PCM@ 96kHz) 20 Hz - 40 kHz ± 1dB

DVD Video (PCM@ 48kHz) 20 Hz - 20 kHz ± 1dB

CD 20 Hz - 20 kHz ± 1dB

Signal-to-Noise Ratio 90dB

Harmonic Distortion 0.01%

Dynamic Range

(If DVD is installed)

DVD Video 95dB

CD 95dB

Line level A/V outputs

Audio (RCA jacks) 2 Vrms

Video (RCA jack) 1 V p-p @75 ohms

Line level A/V inputs

Audio (RCA jack) 2 Vrms

Video (RCA jack) 1 V p-p

General

Power Requirements 14.4 VDC, 3.35 amps 5A fuse

Power Consumption 42.6 watts

Dimensions 345 mm x 65 mm x 282 mm

(length/height/width)

15.25 in. x 3 in. x 18.75 in.

(length/height/width)

Mass 2.3 kg 3 lbs

Operating Temperature 0°–50°C 32°–120°F

Operating Humidity 10% to 90%