Directed Video OHW17 manual Menu Console Menu, Door Light ON/OFF, Courtesy Light ON/OFF

MENU (CONSOLE MENU)

Press "MENU" button on the monitor or remote to activate the screen parameters set-up. The sequence of set-up items is as follows:

FM →		SHARPNESS → BRIGHTNESS → CONTRAST →
		SATURATION	→ HUE → RESET
	FM: Transmitting frequency		SHARPNESS: Sharpness adjustment
	BRIGHTNESS: Brightness adjustment		CONTRAST: Contrast adjustment
	SATURATION: Color saturation adj.		HUE: Color hue adjustment

RESET: Resets above (except FM) to factory default settings.

Once the desired setting is selected, press the cursor buttons to adjust the setting. On the remote use the up/down cursor buttons located at either side of the menu button. On the monitor use the

cursor buttons to the right side of the button. If a button is not activated within 5 seconds, this function mode will turn OFF. Once the correct function is selected, press the cursor button (to set the desired setting). If no button is pressed, the menu mode will turn OFF in about 5 seconds.

The FM frequency setting allows the monitor to transmit audio to the vehicle’s radio. Use a frequency that is not interfered with from a local broadcast station. This setting also has an OFF position.

DOOR LIGHT ON/OFF

Engage this switch on the monitor to activate the dome lights when a door is open.

NOTE: This function is operational only when the Gray wire of the dome light cir- cuit is connected to the door switch.

COURTESY LIGHT ON/OFF

Activate this switch on the monitor to control the dome light illumination.

© 2005 Directed Electronics, Inc. 15