Manuals / Dixon / Lawn and Garden / Lawn Mower

Dixon 11249-106 manual Neutral Adjustment, Care And Maintenance

Models: 11249-106

1 52

Download 52 pages 110 b

Page 43

Image 43

CARE AND MAINTENANCE

NEUTRAL ADJUSTMENT

1.Lift seat.

2.Block up the unit sothat the drive wheels are off the ground. Remove rear tires.

3.Loosen jam nuts on both ends of the control rod coupler. Note: The rear jam nuts are left hand threads.

4.With steering control arms in the “out” neutral position, start the engine and run at fast idle.

5.Adjust the neutral positionbyturningthe control rod coupler until the hubs do not rotate.

6.Re-tighten the jam nuts against the control rod coupler and check to see that the drive wheels are notturning.

7.Repeat steps 3-6 for the other side.

8.Shut off engine before reinstalling rear tires and removing the blocks.

Page 43

Image 43

Dixon 11249-106 manual Neutral Adjustment, Care And Maintenance

Contents

BLACK BEAR ZTR Safety Instructions & Operator’s ManualIMPORTANT - READ CAREFULLY TABLE OF CONTENTS Blade Contact Tip Over Run Over Back Over SAFETYto the potential for injury Safety Alert SymbolWhen you see this symbol, BE ALERT Follow the recommended safety precautions andGENERAL OPERATION GENERAL OPERATION continued Never dismount mower without applying parking brake orstopping engine GENERAL OPERATION continuedon a slope, do not mow it DO SLOPE OPERATIONand tip-overaccidents, which can result in severe injury or deathDO continued SLOPE OPERATION continuedDO NOT SLOPE OPERATION continuedFIRE HAZARDS FIRE HAZARDS continued CHILDREN SERVICE Page BLACK BEAR SPECIFICATIONS3.Release seat slide adjuster SEAT ADJUSTMENT INSTRUCTIONS2.Slide seat forward or backward CONTROL LEVERS CONTROLSTO SET PARKING BRAKE PARKING BRAKECONTROLS CONTROLS MOWER DECK CUT HEIGHT LIFT LEVERCONTROLS BLADE DRIVECIRCUIT BREAKER CHOKE AND THROTTLE CONTROL LEVERBEFORE OPERATING MOWER OPERATION INSTRUCTIONSOPERATION INSTRUCTIONS STARTING INSTRUCTIONSOPERATION INSTRUCTIONS TESTING OF SAFETY INTERLOCK SYSTEMSOPERATION INSTRUCTIONS TESTING OF SAFETY INTERLOCK SYSTEMSof each mowing day OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENTOPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT continuedOPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENTWARNING may result in personal injury MOWING WITH A GRASS CATCHER ATTACHMENT continuedOPERATION INSTRUCTIONS Failure to observe the following instructionsOPERATION INSTRUCTIONS SIDE DISCHARGE OF THE CLIPPINGSOPERATION INSTRUCTIONS GRASS HEIGHT & CUTTING SUGGESTIONSTO FREE WHEEL MACHINE Unlock Transmission TOWING TRAILERS AND OTHER ATTACHMENTSOPERATION INSTRUCTIONS common safety practices with tools CARE AND MAINTENANCEMAINTENANCE SCHEDULE Use extreme care when working on machineryCARE AND MAINTENANCE CUTTER BLADE MAINTENANCEENGINE BATTERYCARE AND MAINTENANCE LUBRICATION TIRESCARE AND MAINTENANCE Engine to Mower Deck Belt BELTSBELT TENSION CARE AND MAINTENANCECARE AND MAINTENANCE CHANGING THE ENGINE OILOIL FILTERS OIL FILLCARE AND MAINTENANCE RECOMMENDED FLUID HYDROSTATIC TRANSMISSION FLUID & FILTER SERVICECARE AND MAINTENANCE SERVICE INTERVALSCARE AND MAINTENANCE HYDROSTAT OIL MAINTENANCE PROCEDUREProtect your environment CARE AND MAINTENANCE NEUTRAL ADJUSTMENTCARE AND MAINTENANCE MOWER DECK LEVELING PROCEDURECARE AND MAINTENANCE MOWER DECK LEVELING PROCEDURE continuedELECTRICAL SYSTEMS CLEANING THE MOWERWARRANTY PARTS/SERVICECARE AND MAINTENANCE MOWER DECK REMOVAL3. HARD TO START ENGINE TROUBLESHOOTING1. ENGINE WON’T TURN OVER 2. ENGINE WILL TURN OVER BUT WON’T START6. ENGINE RUNS BUT MOWER WON’T MOVE FORWARD TROUBLESHOOTING7.MOWER LOSES POWER OR TRANSMISSION OVERHEATS 8. ENGINE STALLS WHEN BLADES ARE ENGAGED44” Black Bear Blades STANDARD SERVICE PARTS LIST34” Black Bear Blades BeltsName Address OWNER’S INFORMATIONDate of Purchase Mower Model Number Mower Serial Number Purchased FromP.O. Box Dixon and ZTR are registered trademarks ofDixon Industries, Inc DIXON INDUSTRIES, INC