| SPECIFICATIONS | |
| 8000 Series (Gas Version) | |
CHASSIS: | 11 GA - rectangular tube, 7 GA reinforcement | |
SEAT: | Designed for operator comfort with padded back & arm | |
| rests. Seat is adjustable fore & aft. Seat back tilts. Mounted | |
| on operator suspension system with damper. | |
MOWER DECK: | 2 decks are available. Both decks are made of 10 GA | |
| fabricated welded construction with 1/4 " reinforcement | |
| plate. 3bladescombinefor eithera60"or 72"cutwidth. Deep | |
| deck with discharge tunnel. Cut height approximately 1.5" to | |
| 6" via 10 position lift handle. | |
BLADE DRIVE: | "V" Belt with Electric clutch | |
DRIVE SYSTEM: | Each rear wheel is independently driven by a HydroGear BDP- | |
| 10A pump and White CE wheel motor. | |
ENGINE: | 25HP Kohler Command, | |
| Valve, | |
| and Crankcase with Cast Iron Liners, Full Pressure | |
| Lubrication/Full Flow Filter, | |
| Carburetor, Electronic Ignition, | |
| Air Cleaner. |
|
STARTING SYSTEM: | Electric by key switch operation with safety interlocks on | |
| parking brake, blade drive clutch and control levers. | |
TIRES: | Front | |
| Rear | |
RECOMMENDED | Front | |
TIRE PRESSURE: | Rear | |
CAPACITIES: | Fuel - 11 gallons (approx) | |
| Hydrostat oil system - 4 quart with | |
| Hydrostat oil recommendation - SAE 20W50 motor oil | |
| Engine - 2 quart. SAE 10W30 motor oil | |
DIMENSIONS: | Width | 73.5"(60" Deck), 85.5"(72" Deck) |
| Height | 54" |
| Length | 87" |
| Weight | 1020 lbs.(60" Deck), 1054 lbs.(72" Deck) |
NOTE: Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
13
