| SPECIFICATIONS | |
CHASSIS: | 11 GA welded channel frame | |
BODY: | All body parts made of rotational molded polyethylene. | |
| Front body contains access panel for battery service. | |
| Seat tilts forward to allow transmission service. | |
MOWERDECK: | 11 GA stamped steel construction. Single 30” cut blade. | |
| Cut height approximately | |
| handle. |
|
BLADEDRIVE: | Mechanical; hand lever engagement | |
TRANSMISSION: | Each rear wheel is independently driven by chain and | |
| sprockets through a friction mechanical drive. | |
ENGINE: | 11HP Briggs & Stratton I/C, | |
| cooled, gasoline, vertical shaft, aluminum head and block. | |
STARTINGSYSTEM: | Electric by key switch operation with safety interlocks on | |
| parking brake and blade drive. | |
TIRES: | Front | 9 x |
| Rear | 16 x |
RECOMMENDED | Front | |
TIREPRESSURE: | Rear | |
CAPACITIES: | Fuel | 3 quart |
| Engine | 1.25 quarts oil |
DIMENSIONS: | Width | 32” outside rear wheel measurement |
| Width | 40” overall width of deck with deflector |
| Height | 31” to top edge of seat |
| Length | 65.5” hitch tab to front |
| Weight | 390 lbs. |
Additional information may be provided elsewhere in this manual.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
17
